【Raspberry Pi】——Static IP on Raspbian platform

角色

In general static IP is widely deployed on an Asterisk server.

Reference information:

http://elinux.org/RPi_Setting_up_a_static_IP_in_Debian

角色

Based on the above link, we could easily modify the IP address of the Raspbian box as follows:

Static IP address = 192.168.88.100
Router IP = 192.168.88.1
Router gateway = 192.168.88.1
Router network = 192.168.88.0/24

1. Make a backup of the "interfaces" file

1. cp /etc/network/interfaces /etc/network/interfaces.sav

複製代碼

2a. Edit the file /etc/network/interfaces using

1. vi /etc/network/interfaces

複製代碼

2b. It gives

1. auto lo
   
2. 
   
3. iface lo inet loopback
   
4. iface eth0 inet dhcp
   
5. 
   
6. allow-hotplug wlan0
   
7. iface wlan0 inet manual
   
8. wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
   
9. iface default inet dhcp

複製代碼

3. Modify and add lines as shown below

1. #auto lo
   
2. 
   
3. #iface lo inet loopback
   
4. #iface eth0 inet dhcp
   
5. 
   
6. # The loopback interface
   
7. auto lo
   
8. iface lo inet loopback
   
9. auto eth0
   
10. iface eth0 inet static
    
11. 
    
12. #your static IP
    
13. address 192.168.88.100
    
14. 
    
15. #your gateway IP
    
16. gateway 192.168.88.1
    
17. netmask 255.255.255.0
    
18. 
    
19. #your network address "family"
    
20. network 192.168.88.0
    
21. broadcast 192.168.88.255
    
22. 
    
23. allow-hotplug wlan0
    
24. iface wlan0 inet manual
    
25. wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
    
26. iface default inet dhcp

複製代碼

4. Restart the Raspbian box

1. /etc/init.d/networking restart

複製代碼