ckleea

Switchfin firmware now up to svn650

The changes can be checked at this link

http://switchfin.svn.sourceforge ... on&revision=650

ckleea

In SVN 667, it said "Add ASterisk 1.8.7.1 support as experimental + Goggle Voice"

I do not know if it will be successful or not. But as far as we tested before, it seems IP01 can only reach somewhere in the version < 600.

ckleea

I have looked in the latest and found that we can compile switchfin to suppprt asterisk 1.8 and add Google voice support.

下載 (237.74 KB)

2011-11-29 11:43

下載 (166.17 KB)

2011-11-29 11:43

I am trying to compile a firmware to see

ckleea

iksemel failed compilation.
inadyn not able to download

ckleea

Unable to make image, size insufficient

bubblestar

Sorry to hear that.  It seems iksemel and inadyn are same old problems that we have came across before.

ckleea

More than that. Same problem of insufficient firmware space

ckleea

succeeded in making the first rom with asterisk 1.8.7.1 and GUI 4.0
Anyone wants to test?

角色

Very good news! Is it possible to put the firmware somewhere in the Internet Cloud with suitable link in the first post of this thread such that for anyone who is interested, he can download it for evaluation?

YH

ckleea

回復 714# 角色


    We tested but full of error on reboot

角色

I believe that the main problem may be due to the limited memory space available for including more program code. If IP-01 comes with an SD(HC) card, it should have any problem eventually.

YH

yiucsw

Two year before, I have send several router to increase its internal Flash/RAM, or add additional antenna. (they solder a big ROM/RAM)
May be we can do the same for IP-01, to recover its value.
As shipping cost is expensive now, besides increase the Flash/RAM size, what can be added? Add SD Card slot?

ckleea

回復 717# yiucsw

I believe if we want to go further with switchfin firmware. Try to get an IP04 with SD card. Developer is using IP04 only.

yiucsw

for me, ROI for IP04 is very low. IPXX is not stable, so just use it as backup or testing purpose.
Wish to turbo charge the IP01, so that it will not become garbage.
Any suggestion for IP01 ?  if increase the RAM or NAND Flash to bigger size, does it help to adapt the new switchfin firmware? or add SD card is the only way.
Any diagram for add SD CARD?

ckleea

回復 719# yiucsw

No idea here. But IP01 can be of use most of the time. My remote IP01 uses very well under switchfin firmware. It can connect to other ATA, asterisks and even other possibilities.