是否跟佢個extensions.conf sample改??
在我心目中, 以為裝完就會有一個fxo等等給我在gui內set.
; this is chunks of Asterisk extensions.conf file for show some chan_dongle features
[general]
[dongle-incoming]
; example of ussd receive
exten => ussd,1,Set(type=${USSD_TYPE})
; values from 0 till 5
; 0 - 'USSD Notify'
; 1 - 'USSD Request'
; 2 - 'USSD Terminated by network'
; 3 - 'Other local client has responded'
; 4 - 'Operation not supported'
; 5 - 'Network time out'
exten => ussd,n,Set(typestr=${USSD_TYPE_STR})
; type in string, see above
exten => ussd,n,Set(ussd=${USSD})
; USSD text, but may be truncated by first \n
exten => ussd,n,Set(ussd_multiline=${BASE64_DECODE(${USSD_BASE64})})
; USSD text, may be multiline
; Note: this exten run in Local channel not attached to anything, also all CALLERID() is empty
exten => ussd,n,Hangup
; example of sms receive
exten => sms,1,Set(sms=${SMS})
; SMS text, but may be truncated by first \n
exten => sms,n,Set(sms_multiline=${BASE64_DECODE(${SMS_BASE64})})
; SMS text, may be multiline
exten => sms,n,Set(raw_cmgr_message=${CMGR})
; raw CMGR message from dongle
; Note: this exten run in Local channel not attached to anything, also CALLERID(num) is address of SMS originator
exten => sms,n,Hangup
; example of begining context execution from not default exten
exten => +12345678901,1,Verbose(This exten executed if Subscriber Number is available and equal +12345678901 or exten setting value is +12345678901)
exten => +12345678901,n,Hangup
; example of channel variables setting by chan_dongle
exten => s,1,Set(NAME_OF_DEVICE=${DONGLE0_STATUS})
; for example 'dongle0' or 'dongle1' see dongle.conf
exten => s,n,Set(NAME_OF_PROVIDE=${DONGLEPROVIDER})
; for example see output of cli 'dongle show devices' column "Provider Name"
exten => s,n,Set(IMEI_OF_DEVICE=${DONGLEIMEI})
; for example see output of cli 'dongle show devices' column "IMEI"
exten => s,n,Set(IMSI_OF_SIMCARD=${DONGLEIMSI})
; for example see output of cli 'dongle show devices' column "IMSI" |
發表於 2013-10-30 23:04
| 
