OBi110 PSTN Caller ID Problem - 应leftright呼吁（45#），HK PSTN的Caller ID是否有Name + Number呢？ - OBi - VoIP 研究室 - 電訊茶室

Rank: 2

16^# 跳轉到 »

發表於 2011-3-18 12:26 | 只看該作者

回復 13# bubblestar

Thanks bubblestar.

YH

mwpmo

Rank: 1

17^#

發表於 2011-3-18 14:14 | 只看該作者

I just install OBi110 in HK with phone and phone line connected.

I wish to use OBiON install in my iPhone to call home or other HK number through OBi110.
And forward all incoming calls to my iPhone when I am not in HK.

Just like the case of Mary in OBAHAI site.

bubblestar

Rank: 1

18^#

發表於 2011-3-18 21:25 | 只看該作者

回復 6# mwpmo

反覆測試過很多次了，無論是否把 FSK(Bell202) 轉為 FSK(V2.3)，結果都是一樣，來電號碼都會被加入一個Random digit。

另外，我對比SPA3102 的設定，根本預設的Bellcore 已經完全可以顯示正確CallerID 了。我再對比一下IP01 IP-PBX，也是用預設的Bell for USA 亦能正確顯示，反而無需改成V.23。 V23 係For UK 及 Japan。

希望OBiHAI 能盡快解決問題吧。

mwpmo

Rank: 1

19^#

發表於 2011-3-19 09:58 | 只看該作者

本帖最後由 mwpmo 於 2011-3-19 09:59 編輯

OBIHAI support team uploaded a testing firmware to my unit "Software 1.20 (Build 2085)"
(All they need is just the OBi Number of my unit and my OBiTalk account name, then they can push the new software to my unit)

Result :
The OBi110 can now detect correct CallerID from the line but fail to show it on the phone.

------------------------

My Test Setup
Test phone number – 12345678
Setting in each case in just about the port section in both Line Port & Phone Port only.

Result :

Case 1) Firmware version 1.1.0 (Build 1892)
Setting : All defaults except “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 51234567
CalledID shown in my phone unit : 51234567

Case 2) Firmware version 1.1.0 (Build 1892) (FSK(V2.3))
Setting : All defaults except “CallerIDMethod” is “FSK(V2.3)” & “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 01234567
CalledID shown in my phone unit : 01234567

Case 3) Firmware version 1.2.0 (Build 2085)
Setting : All defaults except “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 12345678
CalledID shown in my phone unit : blank

Case 4) Firmware version 1.2.0 (Build 2085) (FSK(V2.3))
Setting : All defaults except “CallerIDMethod” is “FSK(V2.3)” & “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 12345678
CalledID shown in my phone unit : blank

Case 5) Firmware version 1.2.0 (Build 2085)
Setting : All defaults
CalledID shown in Call History web page : blank
CalledID shown in my phone unit : blank

Case 6) Firmware version 1.2.0 (Build 2085) (FSK(V2.3))
Setting : All defaults except “CallerIDMethod” is “FSK(V2.3)”
CalledID shown in Call History web page : blank
CalledID shown in my phone unit : blank

ckleea

Rank: 1

20^#

發表於 2011-3-19 10:09 | 只看該作者

Awaiting further testing. They may further adjust the setting in the firmware.

Rank: 2

21^#

發表於 2011-3-19 11:27 | 只看該作者

回復 19# mwpmo

Thank you for your reports on the new firmware provided to you by Obihai Technology. I hope OBi technical support is able to sort out this problem very soon.

YH

仁杰

Rank: 1

22^#

發表於 2011-3-19 14:24 | 只看該作者

这个问题目前都是香港固话才遇到的吗？不知道大陆的是否也这样，虽然制式都差不多，好像雯雯都没有提到过，莫非没问题呢？

突然发现Call History这个功能正是我强烈期望SPA4000能拥有的，我很需要，知己知彼，不用在搞一个东西额外做记录了

雯雯

Rank: 1

23^#

發表於 2011-3-19 16:02 | 只看該作者

回復 22# 仁杰

因為我大陸的固話沒有申請來電顯示功能!

Welcome to my TaoBao shop: http://mandymak520.taobao.com/

Rank: 2

24^#

發表於 2011-3-19 17:09 | 只看該作者

回復 23# 雯雯

现在的固话不是免费的吗？

角色

雯雯

Rank: 1

25^#

發表於 2011-3-19 17:25 | 只看該作者

回復 24# 角色

是, 不過我這條寬帶+PSTN是公司申請的 (員工福利), 當時申請的時候如果要有來電顯示功能要另外加錢!

Welcome to my TaoBao shop: http://mandymak520.taobao.com/

bubblestar

Rank: 1

26^#

發表於 2011-3-19 17:27 | 只看該作者

說起Call History，不知OBi110 能保留多少個記錄呢? 現在暫時我可以看到 71 個。嘩!自己睇返都覺得好誇張，好在是試打電話的記錄，如果真正要講電話，每個10分鐘計，71 x 10 = 710 / 60 = 11.833 小時了，真要命 !!

Rank: 2

27^#

發表於 2011-3-19 17:35 | 只看該作者

回復 25# 雯雯

我的固话是通过申请固网送的，不用申请来电显示也带的。

角色

mwpmo

Rank: 1

28^#

發表於 2011-3-19 18:08 | 只看該作者

Latest News.

With the testing firmware, OBIHAI fixed the CallerID detection problem in Hong Kong.

My phone unit can display correct CallerID now.

Hope they will release it to public soon.