hkbn 2b

tsm

Ching,
I just got a hkbn 2b app accounts 3 days ago
and i use zoiper 2.41 free version

user id : [phoneno]hk
passwd: [password from hkbn]
domain: s2hkbntel.net
proxy:   s22hkbntel.net     ( a must, other won;t work)

and I am able to register
and dial in and out (behind a tomato router without any nat setup)

then I want to try as Ching to use my asterisk 1.4.x (elastix 1.6)
i add the entries to sip_general_custom.conf and extension_custom.conf
and it won't work
and even I switch back to zoiper, it continue to fail

ok, i find out I must wipe out the add entries in asterisk and reload
and ensure show sips no show as peers
and I reset hkbn account and re-login (as advised)

zoiper can register again
but never dial in dial out

error : "bearer capability not auth"
after google it hint to be codec, so I attach what codec used
any hints

woolungtea

剛申請了一個 HKD $28 的 2b , 我在zopier 遇上同樣的error ,

12:03:40 Line 1 : failed (bearercapability notauth)

請問名位ching 有沒有成功 ?

問題已經找到了 , 換一隻router 就沒有問題

tsm

ok
finally i work again
after I apply stun
so I have to study what is stun server
what will be your recommend reading

tsm

Sorry for later reply
Yes, I can use hkbn 2b accounts under zoiper properly (dail -in and out)
but after I edit manually the sip_general_custom.conf and extension_custom.conf
and apply changes, hkbn 2b can no longer work even I restore the original config
and reset the hkbn2b account  

any experience before!
I worried the elastix will still have memory (cache) to register the hkbn
causing everything to fail
any solution!!

角色

If I understood correctly, you were able to use your HKBN 2b accounts on your Elastix system before the deployment of TDM410P FXO card. Now your system was totally collapsed. Are you able to resume the telephony system using Elastix by removing the FXO card?

tsm

回復 2# 角色


    I want to install to the hardware cisco sip phone 7912 or at least software phone(s) in China back office
    if this test account is ok and quality of voice is good=> i will order 10-16 hkbn 2b no at HK$8/month
    so it is very very important that I can handle hkbn 2b account
     
    of course it is best to setup the trunk in elastix/asterisk to forward call to specified extension in the back office

    By the way we have just built a java application to retrieve the callerid from asterisk and use php to query that callerid
    from our inhouse crm and locating the client calling in!
    however, after I purge in an extra tdm410p (4 fxo) card into elastix 1.6 and press detect hardware
    all collapse!!!!!
    I look and look again and nothing wrong in the elastix gui, the config files must be contaminated
    i then know it is better to learn Asterisk Config file rather  thro GUI

角色

Why do not you use the HKBN 2b provided App on iPhone and Android mobile phone?