本帖最後由 角色 於 2013-3-30 10:24 編輯
Objective: How to make the interface ether10 become a PPPoE Server port?
Procedures:
1a) Remove the relationship between the ether10-slave-local to ether6-master-local
1b) Rename interface name to "ether10-pppoe-s"
winbox: Interface
Double click ether10-slave-local and modify as shown in Figure 1 with the following changes
Name: ether10-pppoe-s
Master Port: none
Figure 1: Changes on name and master port
2. Create pppoe-pool
winbox: IP->Pools->+
a) To give a name of the ip pool = pppoe-pool
b) Set ip pool range = 192.168.44.10-192.168.44.254
Figure 2
3) Create PPPoE Server on Interface ether10-pppoe-s
winbox: PPP
a) Click [Interface], press + and select PPPoE Server
Figure 3
4) Define PPP Profile
winbox: PPP->Profiles->+
Figure 4
5) Define PPPoE login credential
Figure 5
6) Set PPPoE Server,
Figure 6 |
發表於 2013-3-10 01:10
| 