【RouterOS】——WAN=DHCP client, LAN=router without DHCP server

角色

1. /inteface ethernet
   
2. add 2 name=Public
   
3. add 10 name=Local

複製代碼

1. /ip dhcp-clinet
   
2. add interface=Public disabled=no

複製代碼

1. print detail
   
2. 0   interface=Public add-default-route=yes default-route-distance=1
   
3.      use-peer-dns=yes use-peer-ntp=yes status=bound address=168.70.xxx.yyy/24
   
4.      gateway=168.70.xxx.yyy dhcp-server=58.153.xxx.yyy
   
5.      primary-dns=218.102.32.134 secondary-dns=219.76.98.66
   
6.      expires-after=27m56s

複製代碼

1. /ip address
   
2. add address=192.168.100.1/24 interface=Local

複製代碼

1. /ip firewall nat
   
2. add action=masquerade chain=srcnat out-inteface=Public

複製代碼

PC TCP/IP setting

host IP=192.168.100.2
netmask = 255.255.255.0
gateway = 192.168.100.1
dns=8.8.8.8

hklkf

951 & routeros x86

角色

回復 6# hklkf

你用什么RB呢？

hklkf

done

角色

你成功了没有？估计你要在firewall里加一条rule能然你的port 80进来后，才能从WAN Port坐webfig。

hklkf

ok

角色

I do not use webfig to connect the router. I often use winbox to connect my RB.

hklkf

how to set wan access webfig port 80