[Solved]-OBi110 updated to 1.3 can't use HKBN 2b.

eXiteRIC

I had set the configuration to previous post
Service Providers -> ITSP Profile A
1) General -> Name: HKBN 2b

where the Name entry contains whatever name that you want
2) SIP -> ProxyServer: s2hkbntel.net
3) SIP -> OutboundProxy: s21.hkbntel.net
4) SIP -> X_ProxyRequire: com.nortelnetworks.firewall

Voice Services -> SP1 Service
5) SIP Credentials -> AuthUserName: 33445566hk
6) SIP Credentials -> AuthPassword: HKBN_2b_password

The "System Status" shown as
SP1 Service Status
Parameter Name        Value       
Status        Registered (server=203.80.89.139:5060; expire in 39s)       
PrimaryProxyServer               
SecondaryProxyServer               
CallState        0 Active Calls

But i can't phone in or out anymore.
Does anyone can give some advise ?!
Thanks.

[SOLVED] - Local Firewall Block the Service, turn off the router's "SPI Firewall" everything work fine.
Thanks for all member help to solve my problem. Kindly - eX

角色

I just finished the phone call with the member eXiteRIC using OBiTalk first and followed by HKBN 2b services. The first few calls employed the OBiTalk service. I was able to hear his voice without any problem but he said my voice was incomplete and was not able hear my message clearly.

Since we are not able to change the codec for OBiTalk, i.e. G711u, which consumes a lot of bandwidth. If your broadband speed is very high then you do not have any problem. However, in most cases, with limited bandwidth, you may have voice quality problem. Therefore I asked him to set the G729a codec to the first priority for the HKBN 2b service. Then we continued our last phone with HKBN 2b with the codec G729a. He said that he could hear my voice and message without any problem.

YH

角色

How do you solve it?

YH

eXiteRIC

回復 14# 角色

[Problem Solved] - The router SPI Firewall problem.

Thank you: YH & Man Man.

角色

回復 12# eXiteRIC

Before upgrading firmware of version 1.3, let say 1.2.x something, you did not have any problem in using HKBN 2b service, did you?

YH

雯雯

回復 11# 角色

都是最新版, 深圳和香港一樣.

eXiteRIC

Are you able to perform your echo test via your Fujian Obi110?
Yes. I can heard my echo.
你时候OBi是什么version？是1.3吗？深圳跟香港一样1.3吗
No, i only have one Obi110, and plan for my parent to make free call to Hong Kong, i just flash the firmware last night by ***6.
HardwareVersion        2.8       
SoftwareVersion        1.3.0 (Build: 2651)

角色

回復 2# 雯雯

你时候OBi是什么version？是1.3吗？深圳跟香港一样1.3吗？

角色

角色

Are you able to perform your echo test via your Fujian Obi110?

YH

eXiteRIC

回復 7# 角色


    1) Fujian right now.
    2) I used 2b original software can dial in/out from computer, i think it must something wrong with Obi110 setting.

角色

I believe that you have two OBi110s right? If you are able to talk each other via OBi numbers, it means your Internet connection at each side should be okay.

YH

角色

回復 5# eXiteRIC

Where are you right now? In Hong Kong or in Fujian?

YH

角色

回復 5# eXiteRIC

This is an echo test if you are able to hear your echo, it mens that your setup in Fujian is okay.

YH

eXiteRIC

回復 4# 角色


    I'm not sure that, coz don't have other OBiTalk number to test it.

Tried dail **9 222 222 222, it connected, it had message return but not sure it it mean work or not.

角色

How about the OBiTalk via OBiNet? Does it work for you between the Fujian and Hong Kong?