trouble shooting asterisk 1.8

ttmuskie

I've just installed asterisk on ubuntu 10.04:

1. Asterisk 1.8.7.0-1digium1~lucid, Copyright (C) 1999 - 2011 Digium, Inc. and others.

複製代碼

But can't get register by using a simple setup:
sip.conf

1. [general]
   
2. 
   
3. [5010]
   
4. type=friend
   
5. nat=yes
   
6. username=5010
   
7. secret=123456
   
8. host=dynamic
   
9. context=default
   
10. 
    
11. [5020]
    
12. type=friend
    
13. nat=yes
    
14. username=5020
    
15. secret=123456
    
16. host=dynamic
    
17. context=default

複製代碼

extensions.conf

1. [default]
   
2. exten => 5010,1,Dial(SIP/5010)
   
3. exten => 5020,1,Dial(SIP/5020)

複製代碼

And I restarted the asterisk service by using:

1. sudo /etc/init.d/asterisk restart

複製代碼

Do I need something else? Thanks.

ckleea

回復 8# ttmuskie


Sometimes, it may be network or cache problem. You may reboot the server to see in the future.

GV has problem in the last few days if dial from asterisk-gtalk channel. However, Obi is ok

ttmuskie

YH and ckeea,

Somehow, it suddenly work this morning.

Btw, I'll try to add the GV over there and believe more questions will arise. Thanks!

ckleea

回復 5# ttmuskie

You should be able to registered. Your settings seem ok.

In zoiper, once you press Apply, you can see the registration message in the asterisk cli.

角色

I am sorry that I am not able to see your image. Have seen my first tutorial / workshop?

YH

ttmuskie

Still don't have any joy:

角色

Your softphones have not got registered yet. You may consider to use other SIP client for instance zoiper classic.

YH

ttmuskie

YH,

Thanks for the prompt response.

1.

1. == Parsing '/etc/asterisk/asterisk.conf':   == Found
   
2.   == Parsing '/etc/asterisk/extconfig.conf':   == Found

複製代碼

2.

1. Name/username              Host                                    Dyn Forcerport ACL Port     Status     
   
2. 5010/5010                  (Unspecified)                            D   N      0        Unmonitored
   
3. 5020/5020                  (Unspecified)                            D   N      0        Unmonitored
   
4. 2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 2 offline]

複製代碼

3. Softphone - Ekiga (within the same lan)

角色

回復 1# ttmuskie

1. You enter the cli command mode using the following command

1. asterisk -rvvvv

複製代碼

2. Use the command "sip show peers" to check the status

3. Do you have any firewall between server and the client? What are you SIP Client? ATA or softphone?

YH