OBi1xx Firmware 1.3 features (Beta Version)
Hello,
Would you like to be part of our Beta Tester group?
We have a new release that includes the following:
Here are the v1.3 highlights:
- Record up to 8 different customized AA prompts from the OBi PHONE Port.
- Upload / download of a package of user-recorded AA prompts via the OBi web browser interface.
- Call recording from the Call Status web page (PHONE port calls only):
- Record and Stop Record button will be shown next to the call (Firefox Only).
- Recording saved as an au file.
- Allow Caller-id spoofing for calls bridged via OBiTALK service. But use the obi number for circle-of-trust authentication.
- Support for blind transfer via star-code. Default star-code is *98
- All InboundCallRoute and OutboundCallRoute syntax will take a ";d=[delay-in-seconds]" parameter after the number to call from the specified trunk, and to insert a delay before the trunk makes the call. For example, SP1(18002211212;d=3) tells the OBi to call the number from SP1 after a 3-second delay.
- Support for options to insert Proxy-Require and Accept-Language headers in outbound INVITE, SUBSCRIBE, and REGISTER requests. Contents are configurable under ITSP Profile A/B - SIP section.
- Support configurable value of Max-Forwards header; option under ITSP Profile A/B - SIP section (Default: 70).
- Support for SIP over TCP/TLS.
- SRTP (S-Descriptor Authentication)
List of the 8 prompts that are replaceable with a user derived recording:
- Welcome (to OBi Attendant) (optional)
- Main Menu (optional)
- Selection Menu – Press 1 to …, Press 2 to …
- Enter PIN (optional if PIN not used)
- Invalid PIN (optional if PIN not used)
- Enter Number (followed by the # key)
- Please Wait (while your call is being connected)
- Goodbye (optional)
- Other Post Dialing Announcements, following SIT tone, are not replaceable.
Prompts can be uploaded to the OBi device as a single prompt file using the device web page:
User records the prompts one-by-one using their favorite tool.
They will store each prompt as a standard wave file using 16-bit uncompressed PCM, mono, 16kHz sample rate.
Obihai provides a tool to create the upload file from the wave files.
The OBi web page has a “browse” button to locate the file and upload to the OBi.
User MUST reboot after the prompt file uploads successfully.
Each prompt can also be recorded from the PHONE port.
Prompts will take effect after a reboot (automatically when hang up).
Thank you:
Sherman |
發表於 2011-8-23 21:29
| 
