返回列表 發帖

OBi110 接 PSTN, 當 PSTN 有來電時但電話不響

HKEPC 有師兄提出此問題, 當時我在公司試過無問題但回到家一試就真的不響, 根據另一位師兄教路在 ring detection 更改一下設定把問題便解決了

http://www.hkepc.com/forum/redir ... 97&pid=24614638

Ring detection.jpg (29.03 KB)

Ring detection.jpg

I believe that you have to pass the CID information to your SP2 using the DigitMap method.

YH

TOP

Tested using Mobile Phone to call Asterisk extension via OBi110 box.  My IP Phone SPA942 with Asterisk extension shows OBi110 SP2 extension as the callerID instead of the real Mobile number.

TOP

I have no callerid at the moment. So not able to tell.

TOP

How about the callerID from the landline via the OBi110 box to an extension of the Asterisk box? Is the Asterisk box able to show the caller ID from the landline?

YH

TOP

回復 10# 雯雯


    I follow your logic and make change to suit my need. I am now able to use OBi110 and asterisk for in and out calls.

TOP

為什麼不用Voice Services >> SP2 Services >> Calling Features >> CallForwardUnconditionalEnable 及 CallForwardUnconditionalNumber

TOP

如果你想要来电显示,我估计你可能要用OBiTalk。

角色

TOP

回復 11# 角色

SP2我用CallCentric.
Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

可能SP2 cut了你的来电显示,SP2你用什么sip server呢?

角色

TOP

回復 9# 角色

在Line Port將InboundCallRoute set為"ph,sp2(xxxxxxx)".
Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

那么你用什么方法去做call forward呢?

角色

TOP

回復 7# 角色

有用, 但是香港的OBi110是call forward去大陸的Draytek Vigor 2920Vn.
Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

你大陆都用OBi110吗?

角色

TOP

回復 5# 角色

能接上, 我將call forward到大陸這邊, 但是看不到來電者的電話號碼.
Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

返回列表