Asterisk 1.6 + FreePBX (Install from AsteriskNOW 1.7) + TDM400P Using Dahdi

角色

因为加卡问题，所以参考下面网页也不成功，不知道members中是否有安装TDM400P和用dahdi driver的经验呢？如果有可否分享一下呢？

http://wiki.contribs.org/FreePBX/DAHDI


角色

ckleea

You can also set up FXOs for line hunting.

角色

It is pretty simple that you install CentOS and yum for Asterisk. That is it.

YH

lttliang

不是指freepbx  而且asterisk

角色

Since I am not going to use Freepbx, then there is no installation manual for freepbx + TDM400P is provided.

YH

lttliang

几时可以出本安装手册？ PDF版

角色

I am able to select which fxo port to send the outbound calls. Now all the calls from all fxo ports go to a fixed extensions. When I am trying to route different fxo ports to extensions, it fails.

The way of freepbx's thinking is defferent from Asterisk-GUI. In freepbx, it requires DID/CID for routing. The fxo DID is defined in Zap channel DID.

It is wasting of our time in exploring non-mature GUI: FreePBX.

YH

ckleea

Not try Free PBX before, but a normal yum install can do for asterisk 1.6, dahdi and TDM400p install

角色

另外一个方法是在Dahdi module，去edit Analogue Hardware

下載 (12.21 KB)

2010-8-30 08:27

也可以。


角色

角色

先用下面的指令产生一个dahdi-channels.conf

dahdi_genconf

然后把dahdi-channels.conf加入

; inculde TDM400P configuration files
#include dahdi-channels.conf

就可以，当然你加入你要在CLI做dahdi reload。


角色