返回列表 發帖

2013/01/03 Announcement Of Latest Asterisk Release- 1.8.19.0, 10.11.0, 11.1.2

本帖最後由 ckleea 於 2013-1-4 06:31 編輯

The Asterisk Development Team has announced the release of Asterisk 1.6.2.11.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

The release of Asterisk 1.6.2.11 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following are a few of the issues resolved by community developers:

* Send DialPlanComplete as a response, not as a separate event. Otherwise, it
   goes to all manager sessions and may exclude the current session, if the
   Events mask excludes it.
   (Closes issue #17504. Reported, patched by rrb3942)

* Allow the "useragent" value to be restored into memory from the realtime
   backend. This value is purely informational. It does not alter configuration
   at all.
   (Closes issue #16029. Reported, patched by Guggemand)

* Fix rt(c)p set debug ip taking wrong argument Also clean up some coding
   errors.
   (Closes issue #17469. Reported, patched by wdoekes)

* Ensure channel placed in meetme in ringing state is properly hung up. An
   outgoing channel placed in meetme while still ringing which was then hung up
   would not exit meetme and the channel was not properly destroyed.
   (Closes issue #15871. Reported, patched by Ivan)

* Correct how 100, 200, 300, etc. is said. Also add the crazy British numbers.
   (Closes issue #16102. Reported, patched by Delvar)

* cdr_pgsql does not detect when a table is found. This change adds an ERROR
   message to let you know when a failure exists to get the columns from the
   pgsql database, which typically means that the table does not exist.
   (Closes issue #17478. Reported, patched by kobaz)

* Avoid crashing when installing a duplicate translation path with a lower
   cost.
   (Closes issue #17092. Reported, patched by moy)

* Add missing handling for ringing state for use with queue empty options.
   (Closes issue #17471. Reported, patched by jazzy)

* Fix reporting estimated queue hold time. Just say the number of seconds
   (after minutes) rather than doing some incorrect calculation with respect to
   minutes.
   (Closes issue #17498. Reported, patched by corruptor)

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pu ... /ChangeLog-1.6.2.11

Thank you for your continued support of Asterisk!

--

My Asterisk Server 11 box has already been updated to the version of 11.1.2, let us see the performance of GV on this box in the coming few days. In general the GV will not able to receive inbound calls.

TOP

回復 270# ckleea

It might lead to the instability of GV installed. It often lost its connection to the GV server. Another GV on OBi110 works perfectly without any problem.

TOP

The Asterisk Development Team has announced a security release for Asterisk 11,
Asterisk 11.1.2. This release addresses the security vulnerabilities reported in
AST-2012-014 and AST-2012-015, and replaces the previous version of Asterisk 11
released for these security vulnerabilities. The prior release left open a
vulnerability in res_xmpp that exists only in Asterisk 11; as such, other
versions of Asterisk were resolved correctly by the previous releases.

This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/releases

The release of these versions resolve the following two issues:

* Stack overflows that occur in some portions of Asterisk that manage a TCP
  connection. In SIP, this is exploitable via a remote unauthenticated session;
  in XMPP and HTTP connections, this is exploitable via remote authenticated
  sessions. The vulnerabilities in SIP and HTTP were corrected in a prior
  release of Asterisk; the vulnerability in XMPP is resolved in this release.

* A denial of service vulnerability through exploitation of the device state
  cache. Anonymous calls had the capability to create devices in Asterisk that
  would never be disposed of. Handling the cachability of device states
  aggregated via XMPP is handled in this release.

These issues and their resolutions are described in the security advisories.

For more information about the details of these vulnerabilities, please read
security advisories AST-2012-014 and AST-2012-015.

For a full list of changes in the current release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... es/ChangeLog-11.1.2

The security advisories are available at:

* http://downloads.asterisk.org/pub/security/AST-2012-014.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-015.pdf

Thank you for your continued support of Asterisk - and we apologize for having
to do this twice!

TOP

The Asterisk Development Team has announced the release of Asterisk 11.1.0.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk

The release of Asterisk 11.1.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following is a sample of the issues resolved in this release:

* --- Fix execution of 'i' extension due to uninitialized variable.
  (Closes issue ASTERISK-20455. Reported by Richard Miller)

* --- Prevent resetting of NATted realtime peer address on reload.
  (Closes issue ASTERISK-18203. Reported by daren ferreira)

* --- Fix ConfBridge crash if no timing module loaded.
  (Closes issue ASTERISK-19448. Reported by feyfre)

* --- Fix the Park 'r' option when a channel parks itself.
  (Closes issue ASTERISK-19382. Reported by James Stocks)

* --- Fix an issue where outgoing calls would fail to establish audio
      due to ICE negotiation failures.
  (Closes issue ASTERISK-20554. Reported by mmichelson)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... sk/ChangeLog-11.1.0

Thank you for your continued support of Asterisk!

TOP

The Asterisk Development Team has announced the release of Asterisk 10.11.0.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk

The release of Asterisk 10.11.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following is a sample of the issues resolved in this release:

* --- Prevent resetting of NATted realtime peer address on reload.
  (Closes issue ASTERISK-18203. Reported by daren ferreira)

* --- Do not use a FILE handle when doing SIP TCP reads.
  (Closes issue ASTERISK-20212. Reported by Phil Ciccone)

* --- Fix ConfBridge crash if no timing module loaded.
  (Closes issue ASTERISK-19448. Reported by feyfre)

* --- confbridge: Fix a bug which made conferences not record with
      AMI/CLI commands
  (Closes issue ASTERISK-20601. Reported by Vilius)

* --- Fix execution of 'i' extension due to uninitialized variable.
  (Closes issue ASTERISK-20455. Reported by Richard Miller)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... k/ChangeLog-10.11.0

Thank you for your continued support of Asterisk!

TOP

The Asterisk Development Team has announced the release of Asterisk 1.8.19.0.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk

The release of Asterisk 1.8.19.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following is a sample of the issues resolved in this release:

* --- Prevent resetting of NATted realtime peer address on reload.
  (Closes issue ASTERISK-18203. Reported by daren ferreira)

* --- Do not use a FILE handle when doing SIP TCP reads.
  (Closes issue ASTERISK-20212. Reported by Phil Ciccone)

* --- Fix execution of 'i' extension due to uninitialized variable.
  (Closes issue ASTERISK-20455. Reported by Richard Miller)

* --- Ensure that the Queue application tracks busy members in off
      nominal situations
  (Closes issue ASTERISK-20623. Reported by Bryan Walters)

* --- Properly extract the Body information of an EWS calendar item
  (Closes issue ASTERISK-19738. Reported by Dmitry Burilov)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... /ChangeLog-1.8.19.0

Thank you for your continued support of Asterisk!

TOP

The Asterisk Development Team has announced the release of Asterisk 1.8.18.1.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk

The release of Asterisk 1.8.18.1 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!

The following is the issue resolved in this release:

* --- chan_local: Fix local_pvt ref leak in local_devicestate().
  (Closes issue ASTERISK-20769. Reported by rmudgett)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... /ChangeLog-1.8.18.1

Thank you for your continued support of Asterisk!

TOP

The Asterisk Development Team has announced the release of Asterisk 11.0.2.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk

The release of Asterisk 11.0.2 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!

The following is the issue resolved in this release:

* --- chan_local: Fix local_pvt ref leak in local_devicestate().
  (Closes issue ASTERISK-20769. Reported by rmudgett)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... sk/ChangeLog-11.0.2

Thank you for your continued support of Asterisk!

TOP

The Asterisk Development Team has announced the release of Asterisk 10.10.1.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk

The release of Asterisk 10.10.1 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!

The following is the issue resolved in this release:

* --- chan_local: Fix local_pvt ref leak in local_devicestate().
  (Closes issue ASTERISK-20769. Reported by rmudgett)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... k/ChangeLog-10.10.1

Thank you for your continued support of Asterisk!

TOP

回復  角色

我已經compile完10,正忙緊set cmphone落去, 唔知點解打出唔得.
雯雯 發表於 2012-11-9 13:23


請看我的帖子

TOP

回復 261# 角色

我已經compile完10,正忙緊set cmphone落去, 唔知點解打出唔得.
Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

Asterisk 1.8.17出了不是很久,那么快就出1.8.18

看来今晚又要忙了。

TOP

回復 259# ckleea

Compiling Asterisk 10, menuselect多了很多東西:
Asterisk 10 menuselect.jpg
Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

The Asterisk Development Team has announced the release of Asterisk 10.10.0.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk

The release of Asterisk 10.10.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following is a sample of the issues resolved in this release:

* --- Resolve issues in ConfBridge regarding marked, waitmarked, and
      unmarked users
  (Closes issue ASTERISK-19562. Reported by flan)

* --- dsp.c User Configurable DTMF_HITS_TO_BEGIN and
      DTMF_MISSES_TO_END
  (Closes issue ASTERISK-17493. Reported by alecdavis)

* --- Fix error where improper IMAP greetings would be deleted.
  (Closes issue ASTERISK-20435. Reported by fhackenberger)

* --- iax2-provision: Fix improper return on failed cache retrieval
  (Closes issue ASTERISK-20337. Reported by John Covert)

* --- Fix T.38 support when used with chan_local in between.
  (Closes issue ASTERISK-20229. Reported by wdoekes)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... k/ChangeLog-10.10.0

Thank you for your continued support of Asterisk!

TOP

返回列表