【RouterOS】——802.1Q Virtual LAN (VLAN)怎样用呢?
本帖最後由 角色 於 2013-3-31 11:53 編輯
因为开始对RouterOS开始有点认识,然后再打算使用它提供的VLAN【1】和TP-LINK TL-SF1016L managed Switch【2】,但是按照【1】都用不用。
我把valn2-4和ether10一起,然后把ether10接入TP-LINK的swtich port 16。- [admin@MikroTik] > /ip address print
- Flags: X - disabled, I - invalid, D - dynamic
- # ADDRESS NETWORK INTERFACE
- 0 ;;; default configuration
- 192.168.77.1/24 192.168.77.0 bridge-local
- 1 D 192.168.44.254/32 192.168.44.1 pppoe-out1
- 2 10.10.20.1/24 10.10.20.0 vlan2
- 3 10.10.30.1/24 10.10.30.0 vlan3
- 4 10.10.40.1/24 10.10.40.0 vlan4
- [admin@MikroTik] >
- [admin@MikroTik] > /interface print
- Flags: D - dynamic, X - disabled, R - running, S - slave
- # NAME TYPE MTU L2MTU MA
- 0 sfp1-gateway ether 1500 1598
- 1 R ether1-gateway ether 1500 1598
- 2 ether2 ether 1500 1598
- 3 ether3 ether 1500 1598
- 4 ether4 ether 1500 1598
- 5 R ether5 ether 1500 1598
- 6 ether6-master-local ether 1500 1598
- 7 ether7-slave-local ether 1500 1598
- 8 ether8-slave-local ether 1500 1598
- 9 ether9-slave-local ether 1500 1598
- 10 ether10-slave-local ether 1500 1598
- 11 X wlan1 wlan 1500
- 12 R bridge-local bridge 1500 1598
- 13 R pppoe-out1 pppoe-out 1480
- 14 vlan2 vlan 1500 1594
- 15 vlan3 vlan 1500 1594
- 16 vlan4 vlan 1500 1594
- [admin@MikroTik] >
複製代碼 【1】http://wiki.mikrotik.com/wiki/Ma ... uting_between_VLANs
【2】http://www.telecom-cafe.com/foru ... &extra=page%3D1 |