Busybox —— route command

角色

1. / # route
   
2. Kernel IP routing table
   
3. Destination Gateway Genmask Flags Metric Ref Use Iface
   
4. 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
   
5. 127.0.0.0 * 255.0.0.0 U 0 0 0 lo
   
6. default pfsense.local.l 0.0.0.0 UG 0 0 0 eth0
   
7. 
   
8. / # route add -net 10.10.10.0 netmask 255.255.255.0 gw 192.168.1.10 dev eth0
   
9. / # route
   
10. Kernel IP routing table
    
11. Destination Gateway Genmask Flags Metric Ref Use Iface
    
12. 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
    
13. 10.10.10.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0
    
14. 127.0.0.0 * 255.0.0.0 U 0 0 0 lo
    
15. default pfsense.local.l 0.0.0.0 UG 0 0 0 eth0

複製代碼

角色

http://www.softpanorama.org/Net/Netutils/route_in_linux.shtml