OBi IP-01 SIP registration error

cccttam

My OBi110 has registration error with ATCOM IP-01 (Register Failed: No Response From Server) after 60s re-boot. Please advise what configuration is needed.

角色

Information provided was not enough for finding where the problems are. Please provide more information such as what you have done.

YH

cccttam

回復 2# 角色


    I setup sp1 for Google voice and sp2 to my IP-01. Everytime I reboot OBi, registration for sp1 and sp2 are successful. After 60 seconds,  OBi re-registration but this time failure. I have no registration problem for the same IP-01 account in x-lite or other SIP client.

角色

In this forum, one member is able to make three OBi110s register his IP-01 without any problems report.

YH

yiucsw

From my past experience, the 1st thing i will check is the router's port 5060-5062 is forward to IP01 and OBI110 or not.

ckleea

If other soft client can connect, there should be setting problem in Obi. My Obi can register without any problem.

亞星

現在有四隻 OBi110 連接到我的 IP01 都沒有問題.

角色

如果是这样，我估计可能楼主没有做好IP-01对router的settings，

5060 and 10000-20000 UDP port forward to local ip address of the ip-01

不知道楼主看完我们的信息后，是否把问题解决呢？


角色

cccttam

Router port forward to IP-01 was done before. My router with DD-WRT firmware. The problem is only happen during re-registration. I will try to change another router for testing.

ckleea

No idea for the time being but you can try to see a different router work. Very often, dd-wrt is not mature enough. Most of them focus on VPN part.

ckleea

I got intermittent register failure problem to my asterisk server after upgrading to the latest firmware.
Anyone encounter this problem.

My asterisk is on the same lan as Obi