Rank: 2

1^# 跳轉到 » 倒序看帖

字體大小: tT

發表於 2011-9-3 10:24 | 只看該作者

【角色茶桌】—— Request for the remarks on installation of Asterisk server

本帖最後由角色於 2011-9-4 14:16 編輯

Since I have not complied Asterisk server for a long time, I almost forgot the compilation details when we install an Asterisk server.

All I know is to
1) download the CentOS 5.6 from the official website www.centos.org,
2) choose the server mode to install the CentOS,
3) yum -y update the CentOS
4) downland the tar ball 1.8.6.0 tar ball from www.asterisk.org and put it into the /usr/scr/asterisk directory

As far as I know, we may need to download other files in order to install the asterisk server. If you know it, please let me know.

YH

bubblestar

新手上路

Rank: 1

2^#

發表於 2011-9-3 13:05 | 只看該作者

SVN method:

Depending on your needs, some packages are optional.

yum -y install gcc gcc-c++ libxml2-devel ncurses-devel openssl-devel mysql-devel sqlite-devel unixODBC-devel libtool-ltdl-devel freetds-devel libvorbis-devel alsa-lib-devel bluez-libs-devel curl-devel libtiff-devel libssl-dev speex speex-devel libusb-devel CIG-devel openldap-devel gmime-devel net-snmp-devel flex bison lua-devel subversion make gnutls-devel gnutls-utils kernel-devel newt-devel mlocate lynx tar wget nmap bzip2 mod_ssl crontabs vixie-cron libxml2 texinfo neon neon-devel
# If you are using E1 cards you need to install LIBPRI.
cd /usr/src/asterisk-complete/libpri
svn co http://svn.asterisk.org/svn/libpri/tags/1.4.12 libpri-1.4.12
cd libpri-1.4.12
make && make install
cd /usr/src/asterisk-complete
wget http://downloads.asterisk.org/pub/telephony/libss7/libss7-1.0.2.tar.gz
tar zxvf libss7-1.0.2.tar.gz
cd libss7-1.0.2
make && make install
# install dahdi
cd /usr/src/asterisk-complete/dahdi
svn co http://svn.asterisk.org/svn/dahdi/linux-complete/tags/2.5.0+2.5.0 dahdi-2.5.0+2.5.0
cd dahdi-2.5.0+2.5.0
make && make install && make config
chkconfig dahdi on
service dahdi start
# Channel Drivers > chan_nbs
cd /usr/src/asterisk-complete
svn co http://svn.digium.com/svn/nbs/trunk nbs-trunk
cd nbs-trunk
make && make install
# Codec Translators > codec_resample
cd /usr/src/asterisk-complete
svn co http://svn.digium.com/svn/thirdparty/libresample/trunk libresample-trunk
cd libresample-trunk
./configure && make && make install
# Resource Modules > res_srtp
cd /usr/src/asterisk-complete
wget -O srtp-1.4.4.tgz http://sourceforge.net/projects/srtp/files/srtp/1.4.4/srtp-1.4.4.tgz/download
tar xvzf srtp-1.4.4.tgz
cd srtp
./configure && make && make install
# Resource Modules > res_calendar_caldav res_calendar_exchange res_calendar_icalendar
cd /usr/src/asterisk-complete
wget -O libical-0.44.tar.gz http://sourceforge.net/projects/freeassociation/files/libical/libical-0.44/libical-0.44.tar.gz/download
tar zxvf libical-0.44.tar.gz
cd libical-0.44
./configure --enable-shared && make && make install
# Resource Modules > res_jabber, Channel Drivers > chan_local chan_jingle
cd /usr/src/asterisk-complete
wget http://packages.sw.be/iksemel/iksemel-devel-1.4-1.el6.rf.i686.rpm
wget http://packages.sw.be/iksemel/iksemel-1.4-1.el6.rf.i686.rpm
rpm -Uvh iksemel-devel-1.4-1.el6.rf.i686.rpm iksemel-1.4-1.el6.rf.i686.rpm
# Resource Modules > res_calendar_ews
cd /usr/src/asterisk-complete
wget -c http://www.webdav.org/neon/neon-0.29.6.tar.gz
tar xvzf neon-0.29.6.tar.gz
cd neon-0.29.6
./configure --enable-shared --with-ssl && make && make install
# Applications > app_osplookup
cd /usr/src/asterisk-complete
wget -O OSPToolkit-3.6.1.tar.gz http://sourceforge.net/projects/osp-toolkit/files/osp-toolkit/OSPToolkit%203.6.1/OSPToolkit-3.6.1.tar.gz/download
tar xvzf OSPToolkit-3.6.1.tar.gz
cd TK-3_6_1-20100107/src
make clean && make build && make install
# et pour asterisk:
./configure --with-osptk=/usr/local/include/osp
# Compiler Flags > hoard
cd /usr/src/asterisk-complete
wget -c http://www.cs.umass.edu/%7Eemery/hoard/hoard-3.8/source/hoard-38.tar.gz
tar xvzf hoard-38.tar.gz
cd hoard-38/src
make linux-gcc-x86
# et pour asterisk:
./configure --with-hoard=/usr/src/hoard-38/src
echo "/usr/src/hoard-38/src" >> /etc/ld.so.conf
# Codec Translators > codec_speex
cd /usr/src/asterisk-complete
wget http://downloads.xiph.org/releases/speex/speex-1.2rc1.tar.gz
tar xvzf speex-1.2rc1.tar.gz
cd speex-1.2rc1
./configure && make && make install
# Applications > res_fax, Resource Modules > res_fax_spandsp
cd /usr/src/asterisk-complete
wget http://soft-switch.org/downloads/spandsp/spandsp-0.0.6pre18.tgz
tar xvzf spandsp-0.0.6pre18.tgz
cd spandsp-0.0.6
./configure && make && make install
echo "/etc/ld.so.conf.d/usrlocallib.conf" /usr/local/lib
cat >> /etc/ld.so.conf.d/usrlocallib.conf /usr/local/lib
ldconfig
# PBX Modules > pbx_lua
cd /usr/src/asterisk-complete
wget http://www.lua.org/ftp/lua-5.1.4.tar.gz
tar xvzf lua-5.1.4.tar.gz
cd lua-5.1.4
make linux && make install
cd /usr/src/asterisk-complete/asterisk
echo "/usr/local/lib" >> /etc/ld.so.conf
ldconfig -v
#optional; If you also want to build the PDF manual (but you don't need to, you will need an optional tool called rubber that compiles Latex into a PDF
cd /usr/src/asterisk-complete
wget http://launchpad.net/rubber/trunk/1.1/+download/rubber-1.1.tar.gz
tar zxvf rubber-1.1.tar.gz
cd rubber-1.1
./configure && make && make install
# install asterisk
cd /usr/src/asterisk-complete/asterisk
#get branch
svn co http://svn.asterisk.org/svn/asterisk/branches/1.8 asterisk-1.8
#get trunk
svn checkout http://svn.asterisk.org/svn/asterisk/trunk asterisk-1.8
cd asterisk-1.8
./configure
#this is only for format MP3 - SVN required
contrib/scripts/get_mp3_source.sh
contrib/scripts/get_ilbc_source.sh
make menuselect
make && make install
make samples
make progdocs
make config
make install-logrotate
chkconfig asterisk on
service dahdi start
service asterisk start
# Optional: GUI installation
http://etel.wiki.oreilly.com/wiki/index.php/Install_the_Asterisk_GUI
# finally install asterisk-gui 2.0; may or may not work for you
cd /usr/src/asterisk-complete
svn co http://svn.digium.com/svn/asterisk-gui/branches/2.0 asterisk-gui
cd asterisk-gui
./configure
make && make install
make samples

複製代碼

TOP

ckleea

新手上路

Rank: 1

3^#

發表於 2011-9-3 14:14 | 只看該作者

Where is this tutorial coming from? It is more complete than that I used before.

TOP

bubblestar

新手上路

Rank: 1

4^#

發表於 2011-9-3 14:42 | 只看該作者

I found that most of the tutorials from English speaking world is sometimes limited, especially for Asterisk 1.8. Hence, I started searching the tutorial in some non-English environment long time ago. The above information was mainly come from a French website, I also add additional information from another Korean and Japanese site with my own experience getting from many installation trial.

The french website is http://www.asterisk-france.org/c ... risk-1.8-sur-CentOS

Google is my friend and Google translation is also my friend too!

TOP

ckleea

新手上路

Rank: 1

5^#

發表於 2011-9-3 15:01 | 只看該作者

What is the purpose of hoard and chan_NBC?

TOP

bubblestar

新手上路

Rank: 1

6^#

發表於 2011-9-3 17:46 | 只看該作者

Umm….. you got me! Don't know what the hoard in depth. What I understand is that it can help speeding up Asterisk and dramatically improve application performance, especially for multithreaded programs running on multiprocessors and multicore CPUs.

Chan_nbs is network broadcast sound support channel driver. I think there is no harm to install it in Asterisk when it is related to sound driver and even don't know how it works behind.

No more supplement here.

TOP

ckleea

新手上路

Rank: 1

7^#

發表於 2011-9-3 20:03 | 只看該作者

回復 6# bubblestar

Have you installed both?

TOP

bubblestar

新手上路

Rank: 1

8^#

發表於 2011-9-3 22:47 | 只看該作者

Yes, I have installed both.

TOP

ckleea

新手上路

Rank: 1

9^#

發表於 2011-9-4 06:59 | 只看該作者

回復 2# bubblestar

This is the most complete one except that one is not working. I also forgot the installation requirement for google talk and calendar

TOP

bubblestar

新手上路

Rank: 1

10^#

發表於 2011-9-4 11:12 | 只看該作者

本帖最後由 bubblestar 於 2011-9-4 11:17 編輯

最初試裝Asterisk 1.8 的時候，遇到很多問題，又有很多不知名、不熟悉及難明的困難，及後，不斷探索，最後整理成現有的安裝程序，現在安裝時使用這一套已經很順利了，我也重覆安裝了很多次，沒有什麼問題發生，所以我把它記錄成文字存檔，方便日後再使用。

Google talk and Calendar，按照以上的步驟便可以了。

至於為什麼要 yum install 這麼多的libraries 和 packages 呢? 哈哈! 懶囉! 也為了省時間嘛!