[已经解决]大陆注册HKBN 2b——用Linksys PAP2T and OBi110不成功！

角色

因为想测试一下OBi110能否注册HKBN 2b，所以特别把在深圳的OBi110重新factory reset，但是都不能安装成功，于是我把我之前用开的Linksys PAP2T接上Internet（以前是可以，而我也没有改动过，之前一个也用过都没有问题），但是依然不成功。

不过前几天看到有CHing和CMei都用HKBN 2b app for iPhone进行注册，难度它们俩用不同的接入方式？

看看过几天，旧的PAP2T是否再次能注册，如果能的话，再用OBi110再注册HKBN 2b。

角色

ckleea

no problem  to register 2b right now via iphone. Any other network problem in your side?

雯雯

我今天在iPhone上用2B沒有問題, 早幾天將2B的setting放落Draytek Vigor 2920Vn上用也沒有任何問題!

角色

回復 2# ckleea

I would not where gives the problem. Perhaps I have to wait for a few days and put the old Linksys PAP2T in place again to check whether it would work again.

YH

ckleea

try to reset your account here
http://pa.2b.com.hk/login.jsp

角色

Oh! My God! I forgot this step.

Once follow ckleea's advice, the registration of my OLD Linksys ATA is able to register the HKBN 2b service.

YH

ckleea

My pleasure. I have encountered this many times before when you helped me to set up asterisk to use 2b

角色

Perhaps, I am really getting OLD because I forgot what I had told you before when you installed your HKBN 2b.

Now I am able to install HKBN 2b in my Shenzhen OBi110.

YH

ckleea

Just you have not turned on your mobile so that I can tell you what wrong.