digit map to SP2

yiucsw

Sorry that i have not set the OBI110 for sometime,
Can someone help me how to config the OBi110:
use Phone to call 013XXxXXxxXX, then the obi100 will call route SP2 (ET263) instead of setup **2
use phone to call XXXXXXXX, then the obi100 will call route Mli (phone port)
call from mobile fix number 91XXXXXX, then the obi100 will call route SP2(ET263) (one stage)

yiucsw

although it is not good, but at least fullfill my first target:
dial 00 e.g. 0060,0030 go to LINE 1
dial 01xxxxxxxxx go to SP2 (et263) which is go to china.
dial 1-9 go to Line 1 which call hong kong number.

{([1-9]x?*(Mpli)):pp},{(<#:>|999|00):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>|01xxxxxxxxx(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

do any one know how to do the one stage call?

lookforyou

修改phone port 的digimap和outboundcallroute

yiucsw

Phone port？ digital map 有什么用处？
Mobile -> line -> aa -> sp2 可以吗？

john.smith

師兄，我唔係好明，請問係咪只係需要修改phone port入面嘅OutboundCallRoute就可以？

PrimaryLine需要改為TrunkGroup嘛？如果要，咁TrunkGroup嘅digitmap係咪又要修改？

thanks so much!

although it is not good, but at least fullfill my first target:
dial 00 e.g. 0060,0030 go to LINE 1
...
yiucsw 發表於 2013-2-21 00:04

yiucsw

put into phone port

下載 (156.36 KB)

2013-10-16 23:48

john.smith

唔該師兄！請問DigitMap要改咩呢？你只係寫咗OutboundCallRoute嘅script，我勉強睇得明。

我主要係想改只要係0755+8個位數字或者1字頭嘅11個字號碼就自動經SP2出，DigitMap似乎冇野要改？

我嘗試過只係改OutboundCallRoute，但無論如何佢都係出SP1，而且之後佢仲好似唔可以正確save到。

put into phone port
yiucsw 發表於 2013-10-16 23:50