角色

用APL与FreePBX的分别

在APL里，我们主要是edit 3个files : sip.conf, iax.conf, extensions.conf

在FreePBX，

sip.conf就变为：

1. sip_additional.conf
   
2. sip.conf
   
3. sip_custom.conf
   
4. sip_custom_post.conf
   
5. sip_general_additional.conf
   
6. sip_general_custom.conf
   
7. sip_nat.conf
   
8. sip_registrations.conf
   
9. sip_registrations_custom.conf

複製代碼

iax.conf就变为：

1. iax_additional.conf
   
2. iax.conf
   
3. iax_custom.conf
   
4. iax_custom_post.conf
   
5. iax_general_additional.conf
   
6. iax_general_custom.conf
   
7. iax_registrations.conf
   
8. iax_registrations_custom.conf

複製代碼

extensions.conf就变为：

1. extensions_additional.conf
   
2. extensions.conf
   
3. extensions_custom.conf
   
4. extensions_custom.conf.sample
   
5. extensions_override_freepbx.conf

複製代碼

角色

我的VM workstation是6.52版本，一上CentOS 5.4就死机！！！

角色

角色

我在powerup多一次又能恢复正常工作！！！

角色

角色

怎样set realm呢？是否又要进入Configuration Files去更改呢？

角色

角色

还有FreePBX是否有像ATCOM IP01里的File Editor呢？

角色

lttliang

还有FreePBX是否有想ATCOM IP01里的File Editor呢？

角色
角色 發表於 2010-5-4 19:19

    冇.....只有Elastix有
     我用Elastix 1.6.2   我要改conf文件  久會入elastix用File Editor改.....一般唔用File Editor時  就在freepbx

角色

其实file editor应该不能做！因为我会APL和vi editor，所以对我来说FreePBX做不到的，我就进入Asterisk系统用UNIX vi command去修改。

角色

角色

再者就算不用所有的GUI，直接用APL也可以！所以认识APL是非常重要的。

角色

Qnewbie

Finnaly find this forum

I installed FreePBX in order to use the callback module. However I cannot make it work

Does anyone have experience to use callback module in FreePBX?

角色

Are you still using the QNAP NAS TS-109 to install the FreePBX software?


YH

Qnewbie

回復 55# 角色


Talking to me?

My TS-101 is now used as backup.

The new toy is 30W atom-based computer, which installed with ClearOS and built up asterisk from source. Still there are many stuffs should be tuned.

角色

Oh！ I thought you are still using the old NAS, I forgot the exact model number.

What is your exact model number and configuration of your ATOM-based PC? Do you have any FXO / FXS card?


YH

Qnewbie

It is ITX-M4S2GAP, which follows the pfense(?) thread in old forum. It should be used as firewall & asterisk & openvpn(latter?) & ?. The price tag is 800CNY(?) + 350HKD(RAM, 2G). The harddisk comes from an old computer.

The interface to PSTN might rely on SPA3000. FXO/FXS card is a bit expansive. As home user, the cheaper the better.

角色

If members have time, you may take a look at the following website:

http://diy.yesky.com/mainboard/89/8725089.shtml


YH

角色

Based on the information from the board maker, the power rating of CPU and chipset is less than 10W, how comes that yours is around 30W? Where is the power of 20W?

YH