Autorun asterisk aftr reboot with updating /etc/host on QNAP TS-119

角色

The following script will let you start asterisk after reboot and update the host ip address in /etc/hosts.

1. mount /dev/mtdblock5 /tmp/config

2. cd /tmp/config

3. vi autorun.sh and append a line "/share/HDA_DATA/.qpkg/Optware/etc/init.d/asterisk-start.sh &
" at the end of autorun.sh, it becomes

1. #!/bin/sh
   
2. # install tun.ko
   
3. #mkdir /dev/net;
   
4. #mknod /dev/net/tun c 10 200;
   
5. #(sleep 10;insmod /opt/etc/openvpn/modules/tun.ko)&
   
6. #/share/HDA_DATA/.qpkg/Optware/etc/init.d/S20openvpn
   
7. /share/HDA_DATA/.qpkg/Optware/etc/init.d/asterisk-start.sh &

複製代碼

Starting the second line with character "#" are created by the NAS system for other packages. You may not see these lines and you just put the last line to autorun.sh.

4. umount /dev/mtdblock5

5. cd /opt/etc/init.d

6. vi asterisk-start.sh and put the code as shown below:

1. #!/bin/sh
   
2. 
   
3. {
   
4.   ###
   
5.   # Section 1: Changes that can be made immediately.
   
6.   ###
   
7. 
   
8. /opt/sbin/asterisk
   
9. 
   
10.   ###
    
11.   # Section 2: Wait for it...
    
12.   ###
    
13. 
    
14.   date; echo "Waiting for boot process to complete."
    
15.   while [ ! -f /tmp/.boot_done ]; do
    
16.     sleep 1
    
17.   done
    
18.   date; echo "Boot process completed, making custom changes."
    
19. 
    
20.   ###
    
21.   # Section 3: Changes after the boot processes have finished.
    
22.   ###
    
23.   cat >>/etc/hosts <<EOD
    
24. 203.80.89.135   s2hkbntel.net s21.hkbntel.net
    
25. EOD
    
26. 
    
27. #  crontab /xyz/home/userx/crontab -u userx
    
28. #  date; echo "autorun_subproc ended."
    
29. } >/tmp/autorun_subproc.out 2>/tmp/autorun_subproc.err &

複製代碼

7. chmod +x ./asterisk-start.sh