【Raspberry Pi】——Additional libraries needed on Raspbian for Asterisk Installation

本帖最後由角色於 2013-10-8 21:23 編輯

libraries needed in order to have the correct operation of the Asterisk 11 on Raspberry Pi box
----------------------------------------------------------------------------------------
apt-get install libncurses5-dev libxml2-dev libsqlite3-dev libssl-dev uuid-dev

check: chan_sip.o, res_rtp_asterisk.so in menuselect
------------------------------------------------------------------------------------------
因为发现sip不能工作，所以知道自己的toolchain对Asterisk on Raspbian package没有complete。

Raspbian = Debian + Raspberry Pi

SD images for reference:

Asterisk server images:
V1: Raspberry + Asterisk-11.5.1 V1 2013-10-05.img Link

Asterisk server + Asterisk-GUI images:
V1: Raspberry + Asterisk-GUI-11.5.1 V1 2013-10-06.img Link
V1.1: Raspberry + Asterisk-GUI-11.5.1 V1.1 2013-10-06.img Link
V1.2: Raspberry + Asterisk-GUI-11.5.1 V1.2 2013-10-06.img Link

In【2】，apt-get build-dep asterisk

References:
[1] http://www.asteriskguru.com/tuto ... ilation_debian.html
[2] http://www.debianhelp.co.uk/asterisk.htm
[3] http://linuxmoz.com/debian-asterisk-10-source-install-guide/
[4] http://letitknow.wordpress.com/2 ... -4-on-debian-6-0-1/
[5] http://blog.keer.info/install-as ... on-debian-wheezy-7/
[6] http://the-asterisk-book.com/1.6/installation-1.4-debian-4.0.html
[7] http://www.howtoforge.com/instal ... me-config-on-debian
[8] http://blogs.digium.com/2012/11/ ... on-ubuntu-12-4-lts/
[9] http://clauseriksen.net/2012/03/ ... e-on-debian-wheezy/
[10] http://nil.uniza.sk/sip/asterisk ... odules-debian-lenny
[11] http://maydian.wordpress.com/201 ... -on-debian-squezze/
[12] http://www.oneunified.net/blog/O ... Asterisk/index.blog
[13] http://blog.philippklaus.de/2011 ... debian-from-source/

Auto-start of Asterisk on Debian
http://blog.jerodsanto.net/2008/ ... -on-boot-in-debian/

Other member's contributions:
http://www.telecom-cafe.com/foru ... &extra=page%3D3

Clean Distribution
make dist-clean

Debian—How to search a package
apt-cache search {package-name}

角色

註冊會員

Rank: 2

2^#

發表於 2013-10-4 22:32 | 只看該作者

本帖最後由角色於 2013-10-6 07:55 編輯

Raspberry + Asterisk-11.5.1 V1 2013-10-05.img

In order to get rid of the configuration errors, please install the following libraries and the installation steps are also summarised

apt-get install libncurses5-dev libxml2-dev libsqlite3-dev libssl-dev
./configure
make menuselect
make
make install

複製代碼

The following example shows the installation steps in details except the libraries which are needed installed in advance.

Raspberry + Asterisk11-V1-2013-10-05.img
asterisk-11.5.1 source
1. Go to check the new version of the Asterisk system
2. mkdir /usr/src/asterisk
3. cd /usr/src/asterisk
4. wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11.5.1.tar.gz
5. tar xvf ./asterisk-11.5.1.tar.gz
6. cd asterisk-11.5.1
7. ./configure
Error message:
configure: error: *** termcap support not found (on modern systems, this typically means the ncurses development package is missing)
8. apt-get install libncurses5-dev
9. ./configure
Error message:
configure: *** XML documentation will not be available because the 'libxml2' development package is missing.
configure: *** Please run the 'configure' script with the '--disable-xmldoc' parameter option
configure: *** or install the 'libxml2' development package.
10. apt-get install libxml2-dev
11. ./configure
Error message:
configure: WARNING: *** Asterisk now uses SQLite3 for the internal Asterisk database.
configure: WARNING: *** Please install the SQLite3 development package.
12. apt-get install libsqlite3-dev
13. ./configure
Finally it gives
configure: Menuselect build configuration successfully completed
.$=..
.$7$7.. .7$7:.
.$:. ,$7.7
.$7. 7$ .$77
..$. $ .$7
..7$ .?. $ .?. 7$.
$.$. .$7. $7 .7$. .$.
.777. .$77$77$7. $,
$~ .7$7. .$.
.$7 .7$7: ?$.
$ ?7$I .$7
$ .7$ :$.
$ $7$ .$.
$ $ 7$7 .$ .$.
$ $7 .$.
7$7 7$ 7$
$ $
$7. $ (TM)
$. .7$ $
$7$.$
$.
configure: Package configured for:
configure: OS type : linux-gnueabihf
configure: Host CPU : armv6l
configure: build-cpu:vendor:os: armv6l : unknown : linux-gnueabihf :
configure: host-cpu:vendor:os: armv6l : unknown : linux-gnueabihf :
root@raspberrypi:/usr/src/asterisk/asterisk-11.5.1#
14. make menuselect
Channel Drivers -> XXX chan_sip (not selected due to lack of other libraries.)
15. apt-get install libssl-dev
16. ./configure
17. make menuselect
18. Check [*] chan_sip
19. make (at 22:19 start) (stopped at 23:41)
It gives
Building Documentation For: channels pbx apps codecs formats cdr cel bridges funcs tests main res addons
+--------- Asterisk Build Complete ---------+
+ Asterisk has successfully been built, and +
+ can be installed by running: +
+ +
+ make install +
+-------------------------------------------+
20. make install
it gives
+---- Asterisk Installation Complete -------+
+ +
+ YOU MUST READ THE SECURITY DOCUMENT +
+ +
+ Asterisk has successfully been installed. +
+ If you would like to install the sample +
+ configuration files (overwriting any +
+ existing config files), run: +
+ +
+ make samples +
+ +
+----------------- or ---------------------+
+ +
+ You can go ahead and install the asterisk +
+ program documentation now or later run: +
+ +
+ make progdocs +
+ +
+ **Note** This requires that you have +
+ doxygen installed on your local system +
+-------------------------------------------+
21. make samples
22. /usr/sbin/asterisk
23. /usr/sbin/asterisk -rvvv
it gives
Asterisk 11.5.1, Copyright (C) 1999 - 2012 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 11.5.1 currently running on raspberrypi (pid = 2180)
raspberrypi*CLI>

複製代碼

TOP

角色

註冊會員

Rank: 2

3^#

發表於 2013-10-4 22:32 | 只看該作者

本帖最後由角色於 2013-10-6 07:55 編輯

Raspberry + Asterisk-GUI-11.5.1 V1 2013-10-06.img

Based on the image "Raspberry + Asterisk-11.5.1 V1 2013-10-05.img" with Astersik-GUI, it forms another image of Asterisk with GUI function.

How to install Asterisk-GUI
1. cd /usr/src/asterisk
2. wget http://downloads.asterisk.org/pub/telephony/asterisk-gui/asterisk-gui-2.1.0-rc1.tar.gz
3. tar xvf ./asterisk-gui-2.1.0-rc1.tar.gz
4. cd asterisk-gui-2.1.0-rc1
5. ./configure
6. make
7. make install
8. edit /etc/asterisk/manager.conf
[general]
enabled = yes
webenabled = yes
port = 8088
bindaddr = 0.0.0.0
[admin]
secret=admin
read=system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan
write=system,call,agent,user,config,command,reporting,originate
9. edit /etc/asterisk/http.conf
[general]
redirect = / /asterisk/static/config/index.html
enabled=yes
bindaddr=0.0.0.0
prefix=asterisk
enablestatic=yes
10. restart asterisk
11. Using a browser to enter an ip address 192.168.88.252:8088
12. Username=admin, Password=admin

複製代碼

TOP

角色

註冊會員

Rank: 2

4^#

發表於 2013-10-4 22:36 | 只看該作者

本帖最後由角色於 2013-10-6 07:37 編輯

Raspberry + Asterisk-GUI-11.5.1 V1.1 2013-10-06.img

based on Raspberry + Asterisk-GUI-11.5.1 V1 2013-10-06.img

added
1. Correct time zone for GMT+8 (for Hong Kong)
2. Autostart /usr/sbin/asterisk

Details.

1a. With reference to http://www.telecom-cafe.com/foru ... &extra=page%3D1

1b.