唔该比个asterisk1.8的详细安装方法

lttliang

唔该边位大佬，比个asterisk1.8的详细安装方法，只要跟住做就可以安装成功个种。

ckleea

唔夠胆出，因為我個方法是 upgrade，而且仲用到GUI (firefox)。
基本上自已 compile會好D, 暫時用rpm 係有問題。

可以參考
http://www.telecom-cafe.com/foru ... &extra=page%3D1
用source code compile 係冇問題。

lttliang

唔夠胆出，因為我個方法是 upgrade，而且仲用到GUI (firefox)。
基本上自已 compile會好D, 暫時用rpm 係有 ...
ckleea 發表於 2010-11-5 06:14

    即是要从asterisk1.6先可以升级？无法从asterisk1.4升级?
因为之前我用code装左冇法用gui

ckleea

我是用source code compile to upgrade. 不過當我backup 完所有舊 files (/etc/asterisk, /usr/lib/asterisk, /var/lib/asterisk)，用 rpm -e or yum remove 所有舊嘅 asterisk rpm，然後用係 asterisk source code directory make install，then make progdocs, make sample, make config，最後放回我原有 1.6 嘅 係/etc/asterisk 嘅 config file
而GUI方面，我從來都冇用rpm install, 用 svn checkout 方法。所以我的GUI 係 firefox work

基本上 asterisk 的 files 係呢幾個 directories
config: /etc/asterisk
modules, codec, apps: /usr/lib/asterisk
sound, gui, backups: /var/lib/asterisk
log: /var/log/asterisk
executable: /usr/sbin

但係唔清楚 dahdi D files。 不過我都會用再 compile 一次 source codes and make install

所以唔想亂寫，教錯大家。

另外，iax 方面有D問題。

lttliang

睇来我仲系乖乖地用返asterisk1.4比较好   等 成熟左  再装asterisk1.8  话唔定冇几耐就会有asterisk1.8的ISO出来了

ckleea

回復 3# lttliang

如果你的 asterisk 1.4 的是用rpm 裝，我會先 backup ，然後 yum remove and rpm -e all asterisk dahdi packages. 再 compile 1.8 source code to install.

遲D我會send out my /var/lib/asterisk/static directory. 你地可以試下 GUI 係 firefox work 唔 work

ckleea

You can try this but I can't guarantee GUI works

1. # fresh Centos 5.5 and get the following packages; more packages may be installed at the same time
   
2. 
   
3. yum install gcc-c++ make gnutls-devel kernel-devel libxml2-devel ncurses-devel subversion doxygen texinfo curl-devel net-snmp-devel neon-devel
   
4. 
   
5. # install dadhi
   
6. cd /usr/src
   
7. wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
   
8. tar zxvf dahdi-linux-complete-2.4.0+2.4.0.tar.gz
   
9. cd dahdi-linux-complete-2.4.0+2.4.0
   
10. make
    
11. make install
    
12. make config
    
13. chkconfig dahdi on
    
14. service dahdi start
    
15. cd ..
    
16. 
    
17. #If you are using E1 cards you need to install LIBPRI.
    
18. wget http://downloads.asterisk.org/pub/telephony/libss7/libss7-1.0.2.tar.gz
    
19. tar zxvf libss7-1.0.2.tar.gz
    
20. cd libss7-1.0.2
    
21. make
    
22. make install
    
23. cd ..
    
24. 
    
25. wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz
    
26. tar zxvf libpri-1.4.12-beta2.tar.gz
    
27. cd libpri-1.4.12-beta2
    
28. make
    
29. make install
    
30. cd ..
    
31. 
    
32. # for Gtalk support
    
33. wget http://iksemel.googlecode.com/files/iksemel-1.4.tar.gz
    
34. tar zxvf iksemel-1.4.tar.gz
    
35. cd iksemel-1.4
    
36. ./configure
    
37. make
    
38. make install
    
39. cd ..
    
40. 
    
41. # for iCal support
    
42. wget http://sourceforge.net/projects/freeassociation/files/libical/libical-0.44/libical-0.44.tar.gz/download
    
43. tar zxvf libical-0.44.tar.gz
    
44. cd libical-0.44
    
45. ./configure --enable-shared
    
46. make
    
47. make install
    
48. cd ..
    
49. 
    
50. #optional; If you also want to build the PDF manual (but you don't need to, you will need an optional tool called rubber that compiles Latex into a PDF
    
51. wget http://launchpad.net/rubber/trunk/1.1/+download/rubber-1.1.tar.gz
    
52. tar zxvf rubber-1.1.tar.gz
    
53. cd rubber-1.1
    
54. ./configure
    
55. make
    
56. make install
    
57. cd ..
    
58. 
    
59. #install asterisk
    
60. wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-1.8.0.tar.gz
    
61. tar zxvf asterisk-1.8.0.tar.gz
    
62. cd asterisk-1.8.0
    
63. ./configure
    
64. #this is ony for format MP3 - SVN required
    
65. contrib/scripts/get_mp3_source.sh
    
66. make menuselect
    
67. make
    
68. make install
    
69. make samples
    
70. make progdocs
    
71. make config
    
72. chkconfig asterisk on
    
73. 
    
74. service dadhi start
    
75. service asterisk start
    
76. 
    
77. # finally install asterisk-gui 2.0; may or may not work for you
    
78. svn checkout http://svn.digium.com/svn/asterisk-gui/branches/2.0/
    
79. cd 2.0
    
80. ./configure
    
81. make

複製代碼

角色

I believe that the compiliation method is the same as Asterisk 1.4 and 1.6. If you are able to compile the the previous tar ball, then you may be able to the new tar ball too.

YH

ckleea

回復 8# 角色


    Yes, exactly the same. Trickly point is GUI not working well.

Qnewbie

Just wondering if the GUI doesn't work, has somebody reported this bug to digium?

ckleea

回復 10# Qnewbie


    yes, it was

電腦超人

不知是否在用64bit的linux關係...
如果在menuselect中全選Compiler Flags或Module Embedding後make也會出現error...

你們會全選所有選項嗎?

ckleea

I do not select any in these 2 submenu

ckleea

For GUI to work under firefox, you need to copy these 2 files to /etc/asterisk
dahdi_scan.conf ; it is of zero bytes in my case
dahdi_guiread.conf;

Perhaps the GUI cannot create the files and keep on loop and loop

bubblestar

回復 12# 電腦超人


   
我沒有做全選，但也選了很多Codec 及 mySQL，Compile 時也出了問題，不過無你咁多error。  今晚再試下用default settings 再裝一次。

BTW，我compile DAHDI 時順利，沒有問題。