SPA 3102 as IP01 Trunk

yiucsw

不知道原因，最近的SPA3102有多ECHO，要尝试了SPA3102 的HTTP Authentication 但不成功。有没有比HKEPC 更详细的说明。用AG188N可以Direct Ip 到 SPA3102，只是IP01不成。
Trunk的名字是不是同SPA user name， HTTP Authentication 一样的？
我已有ET263的VOIPtrunk，有没有影响？

ckleea

回復 1# yiucsw
I put the following in the sip.conf and config the spa for http auth.

1. [pstn-spa3k-d1]
   
2. type = peer
   
3. secret = pass
   
4. username = user
   
5. host = 192.168.xxx.xx
   
6. fromuser = user
   
7. port = 5061
   
8. dtmfmode = rfc2833
   
9. qualify = yes
   
10. nat = yes
    
11. context = default
    
12. disallow = all
    
13. allow = g729
    
14. allow = ulaw
    
15. allow = alaw
    
16. 
    
17. [pstn-spa3k-d6]
    
18. type = peer
    
19. secret = pass1
    
20. username = user6
    
21. host = 192.168.xxx.xxx
    
22. fromuser = user6
    
23. port = 5061
    
24. dtmfmode = rfc2833
    
25. qualify = yes
    
26. nat = yes
    
27. context = default
    
28. disallow = all
    
29. allow = g729
    
30. allow = ulaw
    
31. allow = alaw

複製代碼

yiucsw

有没有Remote host IP (dynamic) sip.conf? can you upload the SPA screenshot also.

ckleea

回復 3# yiucsw


    Not sure your question.

ckleea

You can enable HTTP Digest or auth at PSTN tab.

yiucsw

I cannot find the trunk information under sip.conf, but there is trunk info from user. conf.
But the format seems different:
-GSPSTN
  context=DID_GDPSTN
  host=gd.homeip.net
  username=GDPSTN
  authuser=GDPSTN
  fromuser=GDPSTN
  fromdomain=gd.homeip.net
  secret=xxxxxx
  insecure=very
  contact=
  port=5061
  qualify=2000
  trunkname=GDPSTN
  hasiax=no
  registeriax=no
  hassip=yes
  registersip=no
  trunkstyle=voip
  hasexten=no
  disallow=all
  allow=all

ckleea

I did it manually but not via GUI

bubblestar

If do it manully instead of using GUI, we may see the Trunk name in Red color with question mark (?) under the Dial Plan Section.  One may not want to live with it if he/she is not comfortable to see this sign in the GUI.

bubblestar

回復 8# bubblestar


   
Just like Elastix and Trixbox, I think the new extension_custom.conf in the latest release of Switchfin is desgined for accommodating our own Code and custom trunks.  That may resolve / eliminate the RED question ? problem.

yiucsw

ok, let me try extension_custom.conf

yiucsw

sorry cannot put in extension_customer.conf, the trunk cannot show in GUI or outgoing rule trunk selection.

bubblestar

I'm still using SVN432.  extensions_custom.conf also not function as I wish.  Think that it is still in its infant stage.  Hope the new feautre can come into effect soonest.

yiucsw

After spend few day on SPA3102. finally give up SPA3102 as http authentication. use pin authentication instead

bubblestar

回復 13# yiucsw


   
Sometimes, there is some DTMF detection problem for using PIN.  HTTP digest is a much better solution.  I will show you my settings later.  Don't give up.

bubblestar

IP01 using SPA3102 http digest to dial out PSTN call Settiings.

Settings on the side of Switchfin IP01

下載 (38.28 KB)
HTTP TRUNK

2011-2-1 16:08

下載 (40.63 KB)
OUT RULE

2011-2-1 16:08

Edit the user file under Admin/File Editor as below:

Change registersip=yes to registersip=no


Last, don't forget to tick your Dial Plan to make the DP work.