OBi110 + 2B 問題

chinaz

早兩日買左OBi110 , Set 左 2b 做 SP1 , Dial In Out 正常 , 但我想用 OBiApp --> OBi110 --> 2b --> Dial out , 想請教下我應該點Setup & Dialing , 唔該晒

角色

2 * <香港电话>, where the number 2 is the speed-dial number for your OBi device.

YH

chinaz

thx for reply, I have try it but not success ,any other setting I need to do? Dialing plan or any else? Thanks a lot

角色

You have to set the default primary line (trunk) of OBi device  to be sp1 (HKBN 2b).

I forgot to tell you, you have to creat an OBiAPP account first and then followed by adding all your OBi devices as "my OBi endpoints" in the OBiTalk portal.

YH

chinaz

Yes i have do already , but still not working

bubblestar

如果你的SP1 係 2b，若要用到角色師兄所提的 *2<香港電話>，要留意以下:

1.  OBi110 Setup Wizard >> Outbound Settings >> Primary Line 要設定成SP1 (因為你的2b是在SP1，預設是PSTN Line)

2.  在OBi110 User Settings >> Speed Dial 右邊第二項設定OBi110 號碼 **9200XXXXXX

3.  在 OBiTALK Web Portal 中把 OBiAPP 的OBi Voice Gateway 旁邊選擇下拉選單內自己的OBi110 號碼作為Gateway

Submit and Reboot

現在用OBiAPP 撥 *2 1878200，應該可以接到香港天文台問天氣

角色

回復 5# chinaz

I have alread sent a PM to you and please check it up now.

YH

bubblestar

有一件事要記著的，因為Primary Line 設定成SP1，即OBi110 直接連接的PSTN實體線及電話便不能直撥出街，要先撥**8 <香港電話>。

實際使用模式，要視乎你的習慣了。

角色

Have you upgraded the firmware?

YH

chinaz

Yes Firmware = 1.2.1 (Build: 2286)

chinaz

i haven't a PTSN line on OBI110 , just use the 2B only , now i can just pick up my phone which direct connect to OBI110 and make a call by using 2b , and i direct call my 2b number , the phone will ring and all working fine , but when i using ObiApp (android and iphone or PC) , i can't use SP1 to calling out , i have a try many time but fail , i have try *2+HK phone No. and AA but no luck on it

角色

原理是多年前的CHing（教我怎样利用SSH+ Putty破网）

我给他拨打他的OBi number，然后知道它的意思。

简单来说，他买了一台OBi110，安装了2b （SP1），他不想用one-stage dialling，而用AA拨打，而他也能用iPhone进入AA，press 2 to make a new call, 之后他不知道怎样拨打香港PSTN。

估计很多members都能回答他的问题，就是：

<**1> + <香港电话号码>。

角色

cskahk

訂左obi110 ..下星期我試到話你知點搞..試唔到再上黎問下...XDDDD

leitany

如果再设置
Voice Service\Auto Attendant\PrimaryLine = SP1 Server
就不用加 **1 了.....

chinaz

still not working ............ Use OBION on Android and Iphone is same fail , i see the call had been dial but drop in 1s ....