教程 - Using your spare USB 3G modem with Asterisk (SMS and Voice - In and Out) - Asterisk - VoIP 研究室 - 電訊茶室 - Powered by Discuz!

電訊茶室» VoIP 研究室 » Asterisk » 教程 - Using your spare USB 3G modem with Asterisk (SMS and Voice - In and Out)

1 234 下一頁

返回列表發帖

Rank: 1

31^# 跳轉到 »

發表於 2011-5-2 16:10 | 只看該作者

本帖最後由 bubblestar 於 2011-5-2 16:12 編輯

使用了一兩天，發覺用Nokia E71 3G 撥打 K3715 USB stick 2G 時，它們之間使用了很少人用的Codec slin，因為連接至接通之間，在CLI 發現大量，差不多有成百個以上 Warning，雖然不會影響通話，但始終很礙眼。

Asked to transmit frame type slin, while native formats is 0x4 (ulaw) red/write = 0x4 (ulaw)/0x4 (ulaw)

不想看到這些Warning Floods，解決辦法是到sip.conf 的相關內線中或在 [general] 之中加入

allow = ulaw
allow = alaw
allow = gsm
allow = g729
allow = slin

之後CLI 中再沒發現Warning 了。

Rank: 1

32^#

發表於 2011-5-2 16:18 | 只看該作者

本帖最後由 bubblestar 於 2011-5-2 16:22 編輯

CKleea C-Hing,

Grateful if you could share your IVR settings in extensions.conf as I cannot further process dialing even I can reach my IVR dialing menu. It seems my USB stick cannot recognize (食不到) the DTMF signals from PSTN or Nokia E71 mobile phone.

I guess it might be something related to codec translation again. No ideas but I know you did it successfully.

For information, my Nokia E71 mobile over 3G can dial into the same Asterisk IVR menu using VoIP and further process to other internal/external destination without problem.

Rank: 1

33^#

發表於 2011-5-2 16:35 | 只看該作者

回復 31# bubblestar

I found the same warnings. Thanks for sharing

Rank: 1

34^#

發表於 2011-5-2 17:04 | 只看該作者

回復 32# bubblestar

Sometimes work, sometimes not working. iPhone seems better

Rank: 1

35^#

發表於 2011-5-2 17:34 | 只看該作者

回復 29# 角色

You may try this

http://www.techonia.com/install-huawei-usb-modem-centos

Rank: 1

36^#

發表於 2011-5-2 20:34 | 只看該作者

回復 28# 角色

YH, E1550 is supported modem for voice and SMS

Rank: 1

37^#

發表於 2011-5-9 11:27 | 只看該作者

The frontend GUI has been released but I am not able to make it work
I got this error
ERROR[1823 ...
ckleea 發表於 2011-4-28 09:29

請問這個 GUI 是哪一套軟體？是 Web-based?

OSSLab Blog :: VoIP & IT Consultant

Rank: 1

38^#

發表於 2011-5-9 13:08 | 只看該作者

Yes, web based program using asterisk - java and php.

Rank: 1

39^#

發表於 2011-5-13 17:27 | 只看該作者

剛剛發現標題有問題!

Using your spare USG 3G modem with Asterisk (SMS and Voice - In and Out)

Welcome to my TaoBao shop: http://mandymak520.taobao.com/

Rank: 1

40^#

發表於 2011-5-13 19:53 | 只看該作者

回復 39# 雯雯

已更新，謝謝。

Rank: 1

41^#

發表於 2011-5-13 23:59 | 只看該作者

An updated driver called chan_dongle is now available for test.

I can compile and load into asterisk

Rank: 1

42^#

發表於 2011-5-14 12:30 | 只看該作者

Do we need to remove/uninstall chan_datacard before compilation and how is the performance?

Rank: 1

43^#

發表於 2011-5-14 12:35 | 只看該作者

回復 42# bubblestar

I have not yet tried last night. What I have tested are
1. the original version not able to compile under centos
2. a revised version came out on the next day
3. it can be compiled under centos 5.6 and loaded successfully by my asterisk server
4. the USB stick is shown up properly.
5. I unload the chan_datacard.so module and test on this.
6. will test further if I have time.

Rank: 1

44^#

發表於 2011-5-14 12:51 | 只看該作者

回復 41# ckleea

Some screenshot
[May 14 12:41:24] NOTICE[21609]: chan_datacard.c:1512 reload_config: [datacard0] Loaded device
  == Registered channel type 'Datacard' (Datacard Channel Driver)
-- [datacard0] Trying to connect on /dev/ttyUSB2...
  == Registered application 'DatacardStatus'
  == Registered application 'DatacardSendSMS'
  == Manager registered action DatacardShowDevices
  == Manager registered action DatacardSendUSSD
  == Manager registered action DatacardSendSMS
  == Manager registered action DatacardSetCCWA
  == Manager registered action DatacardReset
  == Manager registered action DatacardRestart
  == Manager registered action DatacardStop
  == Manager registered action DatacardStart
  == Manager registered action DatacardRemove
  == Manager registered action DatacardReload
Loaded chan_datacard.so => (Datacard Channel Driver)

[May 14 12:42:07] NOTICE[22075]: chan_dongle.c:1556 reload_config: [dongle0] Loaded device
  == Registered channel type 'Dongle' (Huawei 3G Dongle Channel Driver)
-- [dongle0] Trying to connect on /dev/ttyUSB2...
  == Registered application 'DongleStatus'
  == Registered application 'DongleSendSMS'
  == Manager registered action DongleShowDevices
  == Manager registered action DongleSendUSSD
  == Manager registered action DongleSendSMS
  == Manager registered action DongleSendPDU
  == Manager registered action DongleSetCCWA
  == Manager registered action DongleReset
  == Manager registered action DongleRestart
  == Manager registered action DongleStop
  == Manager registered action DongleStart
  == Manager registered action DongleRemove
  == Manager registered action DongleReload
Loaded chan_dongle.so => (Huawei 3G Dongle Channel Driver)

ID          Group State    RSSI Mode Submode Provider Name  Model    Firmware       IMEI          IMSI          Number
dongle0    0    Free    21 0 0    CMCC PEOPLES K3715    11.113.03.00.00 3534xxxxxxx39  4541xxxxxxx2294  +8526xxxxxxx

Rank: 1

45^#

發表於 2011-5-26 22:57 | 只看該作者

I use 2 USB modem to test out

screenshot.26-05-2011 22.46.51.png

screenshot.26-05-2011 22.46.51.png

1 234 下一頁