求助：我安裝左spa－3000後，電話會無故發出响聲

本帖最後由 orangelau 於 2014-2-8 15:28 編輯

我安裝左spa－3000並連接asterisk後，電話會無故不定時的發出一下响聲，來電顯示會係分機號碼，拿起電話只有dialing tone，asterisk call log顯示沒有打入或撥出

Qnewbie

新手上路

Rank: 1

2^#

發表於 2014-2-8 19:22 | 只看該作者

You should disable message waiting(something like that) in SPA3000 setting.

RB750G, RB2011UAS-2HnD
IP01, A580IP, AT-610

TOP

orangelau

新手上路

Rank: 1

3^#

發表於 2014-2-9 01:21 | 只看該作者

回復 2# Qnewbie

Thanks, 等我揾揾先

TOP

orangelau

新手上路

Rank: 1

4^#

發表於 2014-2-13 01:41 | 只看該作者

回復 2# Qnewbie

唔得，還有其他方法嗎

TOP

Qnewbie

新手上路

Rank: 1

5^#

發表於 2014-2-13 04:31 | 只看該作者

本帖最後由 Qnewbie 於 2014-2-13 04:34 編輯

There is no easy way to debug.

Disconnect from Asterisk and connect to other ITSP and find if there is any mysterious call signals.

If yes, it should be the problem of your SPA3k. Then you have to set up something in the middle to monitor the traffic from/to SPA3k and find out what's going on.

If no, it is your asterisk problem(I think this is most likely reason). Change your asterisk setting would solve problem.

RB750G, RB2011UAS-2HnD
IP01, A580IP, AT-610

TOP

SuiYan