QNAP TS-269 Pro NAS ipkg Asterisk 1.8

角色

1. 先安装QPKG ipkg，然后在通过ipkg install asterisk 1.8

角色

备用帖子。

角色

备用帖子。

角色

备用帖子。

角色

备用帖子。

角色

备用帖子。

角色

备用帖子。

角色

备用帖子。

角色

备用帖子。

角色

备用帖子。

角色

1. Check the available for asterisk18

[/opt] # ipkg list | grep asterisk18
asterisk18 - 1.8.13.0-1 - Asterisk is an Open Source PBX and telephony toolkit.

2. Installation of Asterisk 1.8

ipkg install asterisk18

角色

After installation, the main code for Asterisk 1.8 could be found in /opt/etc/asterisk.

Take a look at the /opt/etc/asterisk/asterisk.conf containing:

1. [directories](!)
   
2. astetcdir => /opt/etc/asterisk
   
3. astmoddir => /opt/lib/asterisk/modules
   
4. astvarlibdir => /opt/var/lib/asterisk
   
5. astdbdir => /opt/var/lib/asterisk
   
6. astkeydir => /opt/var/lib/asterisk
   
7. astdatadir => /opt/var/lib/asterisk
   
8. astagidir => /opt/var/lib/asterisk/agi-bin
   
9. astspooldir => /opt/var/spool/asterisk
   
10. astrundir => /opt/var/run/asterisk
    
11. astlogdir => /opt/var/log/asterisk

複製代碼

角色

Execute the Asterisk 1.8 binary code

1. [/opt] # /opt/sbin/asterisk &
   
2. [1] 10661

複製代碼

Run the remote console

1. [/opt] # /opt/sbin/asterisk -rvvvvvvvvvvvvvvvvv
   
2. Asterisk 1.8.13.0, Copyright (C) 1999 - 2012 Digium, Inc. and others.
   
3. Created by Mark Spencer <markster@digium.com>
   
4. Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
   
5. This is free software, with components licensed under the GNU General Public
   
6. License version 2 and other licenses; you are welcome to redistribute it under
   
7. certain conditions. Type 'core show license' for details.
   
8. =========================================================================
   
9.   == Parsing '/opt/etc/asterisk/asterisk.conf':   == Found
   
10.   == Parsing '/opt/etc/asterisk/extconfig.conf':   == Found
    
11. Connected to Asterisk 1.8.13.0 currently running on TWTS-269PRO (pid = 10662)
    
12. Verbosity was 0 and is now 17
    
13. TWTS-269PRO*CLI>

複製代碼

雯雯

回復 13# 角色

Remember to add the following auto start script:
http://www.hkepc.com/forum/redir ... 43&pid=28064640

雯雯

回復 13# 角色

Also remember to install G729a codec!