VirtualBox + RouterOS——Case Study 004

角色

Please see the following figure:



Objective:

1. Configure the router R1's ether1 to be a dhcp client such that it obtians 1) ip address from the dhcp server, 2) dns server, 3) IP address of Internet gateway.

Procedures:

1. System reset the router R1 (please see CS001)

1. /system reset-configuration no-defaults=yes

複製代碼

#

2. Remove the default dhcp client

1. /ip dhcp-client remove 0

複製代碼

#

3. Check there is no item in /ip route, /ip address, /ip dhcp client.

4. Add the dhcp client at interface ether1

1. /ip dhcp-client add interface=ether1 disabled=no

複製代碼

#

5. Now you able to ping a hostname, "www.abc.com"



Remarks:
If you not able to ping hostname but IP, then you have to set the previous dns server to allow the remote-dns-requests.