MikroTik RouterBoard750从何入手？？？

bky16

各位师兄，见唔系贵，刚刚买咗一个来学吓嘢。点知打开来，咩都唔晓，有冇师兄可以俾几条LINK来等我学吓啊！
电脑手动设192.168.88.2/255.255.255.0/192.168.88.1，一样PING唔通，按RESET又冇咩反应，究竟怎么入手啊？

bky16

係唔係要下载D嘢先可以连线设定？晕

角色

你是怎样接呢？ISP是怎样接呢？

角色

回復 1# bky16

不用担心，这个RB一定让你练到一身好武功——networking。

bky16

回復 4# 角色


    什么ISP?
用网线接的，还有其他PORT吗？
刚才查了一下，有分CLI MODE，就好似LINUX咁，另外有咩WINDBOX ? 系边度下载？
RouterOS好似又分唔同版本喎！
睇紧你嘅新手篇，不过都系冇头绪！

角色

ISP = Internet Service Provider，就是你的网络商，你用什么上网，PPPoE，DHCP Client？

你下载Winbox。

bky16

知道winbox要下载！之后就用CAT5网线连接吗？
咁CLI又点登录呢？
ROS version3/4/5/6要另外买吗？好似淘宝有人卖
！
睇下你话嘅http://forum.mikrotik.com/

bky16

哦！我未试到连WAN啦！先搞好连线！睇下DHCP之类先，之后再谂WAN。

bky16

ROS就好似系FIRMWARE咁？但系我应该点选呢？

Qnewbie

Your computer should be set as DHCP client.

Use web browser to your RB750, i.e., http://192.168.88.1. Then you will have following picture:


Click the Winbox, you can download the winbox program and run it.

Basically, you don't need to do anything at the beginning except protecting your router:
http://wiki.mikrotik.com/wiki/Securing_your_router

Afterwards, you test your settings in Safe mode:
http://wiki.mikrotik.com/wiki/Console#Safe_Mode

When all work as you want, you apply all the changes otherwise unroll
As warned, you should do small change:

Thus, it is best to change configuration in small steps, while in safe mode. Pressing [Ctrl]+[X] twice is an easy way to empty safe mode action list.

角色

回復 10# Qnewbie

Hello Qnewbie,

I almost forgot the word "Webfig" program if we use http://interface_ip. However it seems that the New Terminal icon does not have the function as we do on winbox.

bky16

TKS for the help. If should have enabled me to have a head start.
If seems to me DHCP is not active on it. I had tried to press the reset button,  but the lights in it did not blink al all. I couldn't tell whether it returned to factory default then.  I will check again, Tis.

bky16

多謝指導！估計係部機有人玩過所以唔係原廠設置，所以DHCP Server跟本不起作用。部嘢都唔知係唔係全新的。哼！
另外，原來reset 要斷電，press and hold reset鍵，接電，等boot 起後就恢復了原廠設置啦。

bky16

reset 好之后，终于设定好咗个DHCP SERVER，都算顺利，不过去到PPPOE，有D问题。
角色CHING,
跟据你嘅LINK
http://www.telecom-cafe.com/foru ... &extra=page%3D1
尝试设定中国电信PPPOE，但系DIALUP连接唔到，有冇咩嘢可以CHECK呀？
原本条线用紧部buffalo行dd-wrt，所以已经直接将个user/password抄过来，应该唔会错

雯雯

回復 14# bky16

你post D圖上來看看, 我也是用中國電信PPPoE, 沒有遇到你所說的問題.