Date:2013-08-16
=================================================================================
*New Features:
1¡¢New-style GUI
2¡¢Extensible storage interface
3¡¢Enhanced callback
4¡¢VPN client of PPTP feature
5¡¢Auto provision
6¡¢Factory Reset with HW key
7¡¢Personal portal for call recording
8¡¢Video support
9¡¢Syslog support
10¡¢Transparent call forwarding for follow me
11¡¢Send messages by e-mail only
12¡¢Ignore call forward on phone function in Ring Group
13¡¢Enhanced MOH
14¡¢FXO/FXS gain adjustment for echo
=================================================================================
V1.4.0
Notice:
1. This manual is only for old firmware (IP0X-1.0.0.xx.xx_release.ext2/md5) upgrade to new firmware (V2.0).
2. The new firmware must be installed under com interface (RS232), please prepare serial console line.
3. The upgrade will clear all configurations , and the backup file of old firmware can’t be used in APBX, which means, after the upgrade, we need to configure the box starting over .
4. All configurations in APBX must be set via WEB GUI, if you want to configure your own Asterisk DialPlan, it is not recommend to do upgrade.
發表於 2013-8-31 21:22
| 