角色

Just installed a few hours ago.

YH

ckleea

The Asterisk Development Team has announced the release of Asterisk 1.6.2.13.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

This release resolves an issue where the .version and ChangeLog files were not
updated for 1.6.2.12. Asterisk 1.6.2.13 has no additional changes from 1.6.2.12
other than the .version, ChangeLog and summary files.

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pu ... /ChangeLog-1.6.2.13

Thank you for your continued support of Asterisk!

I just upgrade to 1.6.2.13

Sam

Just complied 1.6.2.13 in my Buffalo ARM NAS, have to remove 1.4 first and try it later today.

角色

Where did you get the compilear for your ARM NAS?

YH

ckleea

回復 18# Sam

Do you have problem in installation? I try 1.6 for dd-wrt before but somehow not working.

Sam

Where did you get the compilear for your ARM NAS?

YH
角色 發表於 2010-9-17 11:23

2 methods:  
1) Codesourcery  has created the cross toolchain for ARM Processors, you can install this toolchain in Ubuntu.  3 different version of Codesourcery Cross ToolChain can be downloaded here

2) Install GCC it in the NAS box.

I use option 2, a bit slow but it is a more easy way.

Sam

回復  Sam

Do you have problem in installation? I try 1.6 for dd-wrt before but somehow not working ...
ckleea 發表於 2010-9-17 13:04

Still in progress... I will report the result later.

Sam

Ok, seems working but command syntax seems different from v1.4:

# /opt/usr/sbin/asterisk -vvvgc
u-Law coding table test complete.
u-Law tandem transcoding test complete.
a-Law coding tables test complete.
a-Law tandem transcoding test complete.
Asterisk 1.6.2.13, Copyright (C) 1999 - 2010 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Started Asterisk Event Logger
No 'modules.conf' found, no modules will be loaded.
Asterisk Event Logger Started /var/log/asterisk/event_log
Asterisk Dynamic Loader Starting:
  == Manager registered action Ping
Unable to open AMI configuration manager.conf, or configuration is invalid. Asterisk management interface (AMI) disabled.
  == Manager registered action Events
Couldn't find function EXCEPTION in XML documentation
Couldn't find function EXCEPTION in XML documentation
Couldn't find application Answer in XML documentation
Couldn't find application Answer in XML documentation
Couldn't find application BackGround in XML documentation
Couldn't find application BackGround in XML documentation
Couldn't find application Busy in XML documentation
Couldn't find application Busy in XML documentation
Couldn't find application Congestion in XML documentation
Couldn't find application Congestion in XML documentation
Couldn't find application ExecIfTime in XML documentation
Couldn't find application ExecIfTime in XML documentation
Couldn't find application Goto in XML documentation
Couldn't find application Goto in XML documentation
Couldn't find application GotoIf in XML documentation
Couldn't find application GotoIf in XML documentation
Couldn't find application GotoIfTime in XML documentation
Couldn't find application GotoIfTime in XML documentation
Couldn't find application ImportVar in XML documentation
Couldn't find application ImportVar in XML documentation
Couldn't find application Hangup in XML documentation
Couldn't find application Hangup in XML documentation
Couldn't find application Incomplete in XML documentation
Couldn't find application Incomplete in XML documentation
Couldn't find application NoOp in XML documentation
Couldn't find application NoOp in XML documentation
Couldn't find application Proceeding in XML documentation
Couldn't find application Proceeding in XML documentation
Couldn't find application Progress in XML documentation
Couldn't find application Progress in XML documentation
Couldn't find application RaiseException in XML documentation
Couldn't find application RaiseException in XML documentation
Couldn't find application ResetCDR in XML documentation
Couldn't find application ResetCDR in XML documentation
Couldn't find application Ringing in XML documentation
Couldn't find application Ringing in XML documentation
Couldn't find application SayAlpha in XML documentation
Couldn't find application SayAlpha in XML documentation
Couldn't find application SayDigits in XML documentation
Couldn't find application SayDigits in XML documentation
Couldn't find application SayNumber in XML documentation
Couldn't find application SayNumber in XML documentation
Couldn't find application SayPhonetic in XML documentation
Couldn't find application SayPhonetic in XML documentation
Couldn't find application Set in XML documentation
Couldn't find application Set in XML documentation
Couldn't find application MSet in XML documentation
Couldn't find application MSet in XML documentation
Couldn't find application SetAMAFlags in XML documentation
Couldn't find application SetAMAFlags in XML documentation
Couldn't find application Wait in XML documentation
Couldn't find application Wait in XML documentation
Couldn't find application WaitExten in XML documentation
Couldn't find application WaitExten in XML documentation
Can't find indications config file indications.conf.
Couldn't find application Bridge in XML documentation
Couldn't find application Bridge in XML documentation
Could not load features.conf
Couldn't find application ParkedCall in XML documentation
Couldn't find application ParkedCall in XML documentation
Couldn't find application Park in XML documentation
Couldn't find application Park in XML documentation
Unable to open Asterisk database '/var/lib/asterisk/astdb': No such file or directory
No 'modules.conf' found, no modules will be loaded.
*CLI>   == Manager registered action Logoff
  == Manager registered action Login
  == Manager registered action Challenge
  == Manager registered action Hangup
  == Manager registered action Status
  == Manager registered action Setvar
  == Manager registered action Getvar
  == Manager registered action GetConfig
  == Manager registered action GetConfigJSON
  == Manager registered action UpdateConfig
  == Manager registered action CreateConfig
  == Manager registered action ListCategories
  == Manager registered action Redirect
  == Manager registered action Atxfer
  == Manager registered action Originate
  == Manager registered action Command
  == Manager registered action ExtensionState
  == Manager registered action AbsoluteTimeout
  == Manager registered action MailboxStatus
  == Manager registered action MailboxCount
  == Manager registered action ListCommands
  == Manager registered action SendText
  == Manager registered action UserEvent
  == Manager registered action WaitEvent
  == Manager registered action CoreSettings
  == Manager registered action CoreStatus
  == Manager registered action Reload
  == Manager registered action CoreShowChannels
  == Manager registered action ModuleLoad
  == Manager registered action ModuleCheck
Asterisk PBX Core Initializing
Registering builtin applications:
  == Registered custom function 'EXCEPTION'
[Answer]
  == Registered application 'Answer'
[BackGround]
  == Registered application 'BackGround'
[Busy]
  == Registered application 'Busy'
[Congestion]
  == Registered application 'Congestion'
[ExecIfTime]
  == Registered application 'ExecIfTime'
[Goto]
  == Registered application 'Goto'
[GotoIf]
  == Registered application 'GotoIf'
[GotoIfTime]
  == Registered application 'GotoIfTime'
[ImportVar]
  == Registered application 'ImportVar'
[Hangup]
  == Registered application 'Hangup'
[Incomplete]
  == Registered application 'Incomplete'
[NoOp]
  == Registered application 'NoOp'
[Proceeding]
  == Registered application 'Proceeding'
[Progress]
  == Registered application 'Progress'
[RaiseException]
  == Registered application 'RaiseException'
[ResetCDR]
  == Registered application 'ResetCDR'
[Ringing]
  == Registered application 'Ringing'
[SayAlpha]
  == Registered application 'SayAlpha'
[SayDigits]
  == Registered application 'SayDigits'
[SayNumber]
  == Registered application 'SayNumber'
[SayPhonetic]
  == Registered application 'SayPhonetic'
[Set]
  == Registered application 'Set'
[MSet]
  == Registered application 'MSet'
[SetAMAFlags]
  == Registered application 'SetAMAFlags'
[Wait]
  == Registered application 'Wait'
[WaitExten]
  == Registered application 'WaitExten'
  == Manager registered action ShowDialPlan
  == Registered application 'Bridge'
    -- Registered extension context 'parkedcalls' (0x198760) in table 0x1986c8; registrar: features
  == Registered application 'ParkedCall'
  == Registered application 'Park'
  == Manager registered action ParkedCalls
  == Manager registered action Park
  == Manager registered action Bridge
  == Manager registered action DBGet
  == Manager registered action DBPut
  == Manager registered action DBDel
  == Manager registered action DBDelTree
Asterisk Dynamic Loader Starting:
Asterisk Ready.

*CLI>

角色

For 1.4.36 compilation, I have problems in find the command md5sum. Do you know where I can install it?

build_tools/make_buildopts_h: line 25: md5sum: command not found

YH

角色

When I try to run "make menuselect", it gives the following errors:

1. [/opt/usr/src/asterisk-1.4.36] # make menuselect
   
2. CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" makeopts
   
3. make[1]: Entering directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
   
4. make[1]: `makeopts' is up to date.
   
5. make[1]: Leaving directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
   
6. CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" cmenuselect
   
7. make[1]: Entering directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
   
8. make[1]: Nothing to be done for `cmenuselect'.
   
9. make[1]: Leaving directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
   
10. CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" nmenuselect
    
11. make[1]: Entering directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
    
12. make[1]: Nothing to be done for `nmenuselect'.
    
13. make[1]: Leaving directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
    
14. CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" gmenuselect
    
15. make[1]: Entering directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
    
16. make[1]: Nothing to be done for `gmenuselect'.
    
17. make[1]: Leaving directory `/share/HDA_DATA/.qpkg/Optware/usr/src/asterisk-1.4.36/menuselect'
    
18. No menuselect user interface found. Install ncurses,
    
19. newt or GTK libraries to build one and re-rerun
    
20. 'make menuselect'.

複製代碼

I have already installed ncurses and newt programms but I still failed to "make menuselect".

YH

ckleea

回復 23# Sam


    It wsa somewhat I encountered before. I switch to Asterisk 1.4

Sam

For 1.4.36 compilation, I have problems in find the command md5sum. Do you know where I can install  ...
角色 發表於 2010-9-17 16:04

md5sum is in my system when I install the GNU coreutils.

角色

Thank you for your information.
I am using QNAP TS-119. Let me try to install GNU coreutils.

YH

Sam

When I try to run "make menuselect", it gives the following errors:I have already installed ncurses  ...
角色 發表於 2010-9-17 16:29

Did "ldconfig -v" show libncurses ?

角色

Did "ldconfig -v" show libncurses ?
Sam 發表於 2010-9-18 00:34

Yes, it shows libncurses.so.5 -> libncurses.so.5.5.

YH