角色

CK has you tried to install Asterisk 10.0.0?

YH

ckleea

I  have done it before but support is limited before. Noew I am trying at VM at my atom server and will install the new beta again later

ckleea

The Asterisk Development Team has announced a security release for Asterisk 1.8.
The available security release is released as version 1.8.7.1.

This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/releases

The release of Asterisk 1.8.7.1 resolves an issue with SIP URI parsing which can
lead to a remotely exploitable crash:

   Remote Crash Vulnerability in SIP channel driver (AST-2011-012)

The issue and resolution is described in the AST-2011-012 security
advisory.

For more information about the details of this vulnerability, please read the
security advisory AST-2011-012, which was released at the same time as this
announcement.

For a full list of changes in the current release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... s/ChangeLog-1.8.7.1

Security advisory AST-2011-012 is available at:

http://downloads.asterisk.org/pub/security/AST-2011-012.pdf

Thank you for your continued support of Asterisk!

角色

回復 168# ckleea

Thank ck's message, I am compiling the source code on my NAS TS119 platform.

YH

角色

I have already updated 1.8.7.1 on my QNAP NAS operation.

1. [/opt/src/asterisk-1.8.7.1] # /opt/asterisk-1.8/sbin/asterisk
   
2. [/opt/src/asterisk-1.8.7.1] # /opt/asterisk-1.8/sbin/asterisk -rvvv
   
3. Asterisk 1.8.7.1, Copyright (C) 1999 - 2011 Digium, Inc. and others.
   
4. Created by Mark Spencer <markster@digium.com>
   
5. Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
   
6. This is free software, with components licensed under the GNU General Public
   
7. License version 2 and other licenses; you are welcome to redistribute it under
   
8. certain conditions. Type 'core show license' for details.
   
9. =========================================================================
   
10.   == Parsing '/opt/asterisk-1.8/etc/asterisk/asterisk.conf':   == Found
    
11.   == Parsing '/opt/asterisk-1.8/etc/asterisk/extconfig.conf':   == Found
    
12. Connected to Asterisk 1.8.7.1 currently running on TWTS119 (pid = 28408)
    
13. Verbosity was 0 and is now 3

複製代碼

ckleea

回復 170# 角色


   Any problems encountered? I have two asterisk servers updated. No problem so far.

角色

I do not have any problem encountered.

YH

ckleea

The Asterisk Development Team is pleased to announce the release of
DAHDI-Linux 2.5.0.2 and DAHDI-Tools 2.5.0.2.

2.5.0.2 is a bug fix release. It is recommended that current users of v2.5 to
upgrade.

DAHDI-Linux 2.5.0.2, DAHDI-Tools 2.5.0.2, and DAHDI-Linux-Complete
2.5.0.1+2.5.0.1 are available for immediate download at:

http://downloads.asterisk.org/pub/telephony/dahdi-linux
http://downloads.asterisk.org/pub/telephony/dahdi-tools
http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete

Issues closed by this release:
DAHLIN-257: wcb4xxp shows hardware EC in /proc/dahdi/* for B410P although vpmsupport=0
DAHLIN-260: wctdm24xxp/base.c fails to compile in 2.6.16 kernel

The DAHDI-Linux short log from v2.5.0.1 is:

Shaun Ruffell (8):
       dahdi: Decrease the initial coretimer delay to 4ms from 1 second.
       wctdm24xxp, wcte12xp: Advertise VPMOCT032 presence in dahdi_span.devicetype.
       dahdi: Check for master in DAHDI_STARTUP / resolves MeetMe regression.
       wctdm24xxp: Set dahdi_span.devicetype string in one place.
       wctc4xxp: Allow G723 SID frames to pass to the hardware decoder.
       wct4xxp: Fix condition where hardware echo canceler erroneously mutes DTMF.
       wcb4xxp: Do not show LASVEGAS2 as echocan name if vpmsupport is set to 0
       dahdi: Move WARN_ON_ONCE from wctc4xxp driver to include/dahdi/kernel.h

Tzafrir Cohen (1):
       xpp: fxs: bugfix for 2fxs+6fxo cards

The DAHDI-Tools short log from v2.5.0.1 is:

Shaun Ruffell (2):
       dahdi_genconf: Assume spans with unknown term types are software selectable.
       dahdi_genconf: Use 'dahdi_scan' to determine span_type for B410P cards.

And the diff stat for this release from v2.5.0.1 is:

drivers/dahdi/dahdi-base.c      |    6 +++++-
drivers/dahdi/wcb4xxp/base.c    |    2 +-
drivers/dahdi/wct4xxp/base.c    |    2 --
drivers/dahdi/wctc4xxp/base.c   |   21 ++++-----------------
drivers/dahdi/wctdm24xxp/base.c |   31 +++++++++++++++++++++++--------
drivers/dahdi/wcte12xp/base.c   |    8 +++++++-
drivers/dahdi/xpp/card_fxs.c    |   39 +++++++++++++++++++++++++++++++--------
include/dahdi/kernel.h          |   13 +++++++++++++
8 files changed, 84 insertions(+), 38 deletions(-)

and for DAHDI-Tools:

xpp/perl_modules/Dahdi/Span.pm |   37 +++++++++++++++++++++++++++++++++++--
1 files changed, 35 insertions(+), 2 deletions(-)

For a full list of changes in these releases, please see the ChangeLog at
http://svn.asterisk.org/svn/dahdi/linux/tags/2.5.0.2/ChangeLog and
http://svn.asterisk.org/svn/dahdi/tools/tags/2.5.0.2/ChangeLog .

Issues found in this release can be reported in the
DAHDI-Linux [1] and DAHDI-Tools [2] projects at
https://issues.asterisk.org/jira

[1] https://issues.asterisk.org/jira/browse/DAHLIN
[2] https://issues.asterisk.org/jira/browse/DAHTOOL

Thank you for your continued support of Asterisk!

bubblestar

尋晚 8 點幾鐘check 過仍是Dahdi 2.5.0.1，一定是半夜更新的。

謝謝通知。

ckleea

回復 174# bubblestar


    估計你今天都會幾忙

bubblestar

係呀，都幾忙碌架。

ckleea

I just completed the dadhi update

角色

回復 177# ckleea

你有FXO插入Asterisk？

角色

ckleea

回復 178# 角色

I do not need dahdi as I do not have any hardware card but I found it buggy in the previous version and so I make an installation.

I also make another asterisk compilation and installation this afternoon.

角色

I have already updated the Asterisk 1.8.7.1 and Dahdi 2.5.0.2

1. Asterisk 1.8.7.1, Copyright (C) 1999 - 2011 Digium, Inc. and others.
   
2. Created by Mark Spencer <markster@digium.com>
   
3. Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
   
4. This is free software, with components licensed under the GNU General Public
   
5. License version 2 and other licenses; you are welcome to redistribute it under
   
6. certain conditions. Type 'core show license' for details.
   
7. =========================================================================
   
8.   == Parsing '/etc/asterisk/asterisk.conf':   == Found
   
9.   == Parsing '/etc/asterisk/extconfig.conf':   == Found
   
10. Connected to Asterisk 1.8.7.1 currently running on leo (pid = 23955)
    
11. Verbosity is at least 3
    
12. leo*CLI>

複製代碼

YH