【OpenWRT】—— PPTP client traffic routed to remote gateway

本帖最後由角色於 2014-2-3 17:20 編輯

The following pictures illustrate the instruction methods of PPTP Client on OpenWRT machine and the local traffic will be routed to the remote gateway of the remote VPN server. In the following example, OpenWRT 12.09 is used.

1. Click [System]->[Software]. Before the installation of any packages, update the package list of OpenWRT

2. Install the package "ppp-mod-pptp"

3. Wait for a moment, it gives the following screen

4. Check installed packages which includes "ppp-mod-ppp"

5. Click [Network]->[Interface]. Go to the bottom and click "Add new interface"

6. Enter "vpn" in the field "Name of the new interface" and select "PPtP" in field "Protocol of the new interface". Press "Submit" to proceed to the next screen in 7.

7. Enter <VPN server name or ip> in the field "VPN Server". Enter <VPN user name> in the field "PAP/CHAP username". Enter <VPN password> in the field "PAP/CHAP password". Press "Save & Apply" to proceed.

8. Click "Advanced Settings" and note the check of "Bring up on boot". If it is changed, then press "Save & Apply" to proceed.

9. Click "Firewall Settings" and change the "Create/Assign firewall-zone" to "WAN". Press "Save & Apply" to proceed.

10. Choose [Network]->[Firewall]->[General Settings], check "vpn" added to the WAN. (You do not need to change everything).

11 Go to [Network]->[Interfaces] and check whether you have the following the screen

12. Reboot the router to make the PPTP client work for you

References:
【1】http://wiki.openwrt.org/doc/howto/vpn.client.pptp
【2】http://www.openwrt.org.cn/bbs/archiver/?tid-1480.html
【3】http://www.hkepc.com/forum/viewthread.php?tid=1697252

附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

角色

註冊會員

Rank: 2

2^#

發表於 2013-11-16 20:30 | 只看該作者

本帖最後由角色於 2013-11-17 14:26 編輯

If you know how to ssh the OpenWRT router, you could install the PPTP Client more easily.

1. opkg update

2. opkg install ppp-mod-pptp

3. Edit /etc/config/network and add

config 'interface' 'vpn'
      option 'proto'    'pptp'
      option 'ifname' 'vpn'
      option 'username'  'vpnuser'
      option 'password'  'vpnpass'
      option 'server' 'vpn.example.org'

4. Additionally the "wan" firewall zone must include both interfaces in /etc/config/firewall:

config 'zone'
      option 'name'    'wan'
      option 'network' 'wan vpn'
      option 'input'    'REJECT'
      option 'forward' 'REJECT'
      option 'output' 'ACCEPT'
      option 'masq'    '1'

TOP

角色

註冊會員

Rank: 2

3^#

發表於 2013-11-17 14:33 | 只看該作者

Note the following settings.

If you want the OpenWRT router to connect the remote VPN server router, then you have to put a tick at Step 8 of the first post. If you do not wnat, uncheck it.

General operations:

1. If you want to disconnect the VPN, then press "Stop" buttong in Step 11 of the first post. You have to stop the "WAN" port as well. After a few seconds, you can connect the Internet by pressing "Connect" button as again.

TOP

Skypeus