Switchfin firmware on ATCOM IP01 - VoIP 研究室 - 電訊茶室

Rank: 1

32^#

發表於 2010-8-19 09:11 | 只看該作者

It seems I have more free memory than yours ATCOM firmware. When top command is issued. It still shows 7860k free

Rank: 2

33^#

發表於 2010-8-19 09:16 | 只看該作者

From mine （ip-01）， after issuing the command cat /proc/meminfo, it gives

root:~> cat /proc/meminfo
MemTotal: 45704 kB
MemFree: 5108 kB
Buffers: 772 kB
Cached: 10996 kB
SwapCached: 0 kB
Active: 7060 kB
Inactive: 4708 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 0 kB
Mapped: 0 kB
Slab: 4056 kB
SReclaimable: 536 kB
SUnreclaim: 3520 kB
PageTables: 0 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 22852 kB
Committed_AS: 0 kB
VmallocTotal: 0 kB
VmallocUsed: 0 kB
VmallocChunk: 0 kB

複製代碼

Since I have many trunks and users, I do not know whether it will consume more memory size that yours.

YH

Rank: 1

34^#

發表於 2010-8-19 09:38 | 只看該作者

本帖最後由 ckleea 於 2010-8-19 09:45 編輯

May be, It can be a better way to compare in the future.

Please also note that I have less total memory to start with. Perhaps this is due to a bigger firmware I have and more options I built into

I have asked the developer
1. we can change the default network setting before compilation
2. for codecs, it appears G729 is only available in asterisk 1.4 but he advises that for production environment, it needs to pay the loyalty fee. A point very different from ATCOM firmware. He has not mentioned about speex and other

My observation during compilation is that when I select asterisk 1.4, much more options are available e.g. a few fax options

Rank: 2

35^#

發表於 2010-8-19 11:33 | 只看該作者

For the codec G729, from the developer's point of view, he gives you a general suggestion for the use of the codec G729, which is required a license from the corresponding body. However in ATCOM, it seems that they do not mention this point as I guess they obtained the G729 codec license from the blackfin processer company.

Concernng the codec Speex, I believe that you may compile it from the speex source codecs. However it may involve a lot of efforct in finding the associated libaries in the course of code complilation. I believe that you can overcome this problem.

Also you know that there are so many software bugs in the current firmware, I hope that the kernel in Switchfin will fix all these bugs.

YH

Rank: 1

36^#

發表於 2010-8-19 11:35 | 只看該作者

本帖最後由 ckleea 於 2010-8-19 11:50 編輯

I am in the same direction as you are and will probably compile asterisk 1.4 under switchfin for the IP01.

Indeed, I found problems to compile asterisk 1.6

Rank: 2

37^#

發表於 2010-8-19 19:24 | 只看該作者

In the ATCOM IP-01, when we enter the command ps, it gives

1 root 568 S /sbin/init
2 root SW< [kthreadd]
3 root SWN [ksoftirqd/0]
4 root SW< [events/0]
5 root SW< [khelper]
6 root SW< [kblockd/0]
7 root SW [pdflush]
8 root SW [pdflush]
9 root SW< [kswapd0]
10 root SW< [aio/0]
11 root SW< [mtdblockd]
79 root SW< [spi_mmc]
112 root 1060 S /bin/sh /bin/keepalive 192.168.2.1 60
128 root 820 S ntpd -4 -c /etc/ntp.conf -g -n
133 root 484 S /bin/cron
151 root 12580 S asterisk -f
153 root 1060 S /bin/sh /persistent/etc/IsAsteriskAlive.sh
155 root 1060 S /bin/sh /persistent/etc/RebootTime.sh
167 root 12580 S asterisk -f
173 root 12580 S asterisk -f
174 root 12580 S asterisk -f
175 root 12580 S asterisk -f
180 root 12580 S asterisk -f
194 root 12580 S asterisk -f
214 root 12580 S asterisk -f
219 root 12580 S asterisk -f
259 root 12580 S asterisk -f
260 root 12580 S asterisk -f
261 root 12580 S asterisk -f
262 root 12580 S asterisk -f
263 root 12580 S asterisk -f
264 root 12580 S asterisk -f
265 root 12580 S asterisk -f
266 root 12580 S asterisk -f
267 root 12580 S asterisk -f
268 root 12580 S asterisk -f
269 root 12580 S asterisk -f
270 root 12580 S asterisk -f
293 root 12580 S asterisk -f
310 root 1060 S /bin/sh /etc/checkip.sh
311 root 484 S inetd
324 root 1068 S -/bin/sh
325 root 476 S /bin/watchdogd -f -s
326 root 968 S /sbin/syslogd -n
327 root 976 S /sbin/klogd -n
328 root 12580 S asterisk -f
24577 root 12580 S asterisk -f
30355 root 968 S sleep 180
30358 root 968 S sleep 60
30359 root 884 S /bin/dropbear -i 2 > /dev/null
30364 root 968 S sleep 60
30370 root 968 S sleep 50
30371 root 1068 S -sh
30372 root 972 R ps

複製代碼

I would like to know how many asterisk processes in Switchfin?

Thank you.

YH

Rank: 1

38^#

發表於 2010-8-19 20:13 | 只看該作者

My switchfin

root@ip0x:~> ps
  PID USER    VSZ STAT COMMAND
1 root    576 S /sbin/init
2 root       0 SW<  [kthreadd]
3 root       0 SW<  [ksoftirqd/0]
4 root       0 RW<  [events/0]
5 root       0 SW<  [khelper]
30 root       0 SW<  [kblockd/0]
50 root       0 SW [pdflush]
51 root       0 SW [pdflush]
52 root       0 SW<  [kswapd0]
  145 root       0 SW<  [mtdblockd]
  184 root       0 SW<  [ubi_bgt0d]
  191 root       0 SW<  [ubifs_bgt0_0]
  253 root    524 S dhcpcd -p
  264 root    820 S ntpd -4 -c /etc/ntp.conf -g -n
  268 root    492 S /bin/cron
  292 root    13992 S asterisk -f
  294 root    492 S procwatch -t 6000 -w 27 -p asterisk -c 5000 -l /var/
  295 root    492 S inetd
  304 root    716 S /bin/getty -L console 115200 vt100
  305 root    492 S /sbin/inetd
  306 root    716 S /sbin/syslogd -n
  307 root    712 S /sbin/klogd -n
  308 root    13992 S asterisk -f
  309 root    13992 S asterisk -f
  310 root    13992 S asterisk -f
  311 root    13992 S asterisk -f
  312 root    13992 S asterisk -f
  313 root    13992 S asterisk -f
  314 root    13992 S asterisk -f
  315 root    13992 S asterisk -f
  389 root    13992 S asterisk -f
  390 root    13992 S asterisk -f
  391 root    13992 S asterisk -f
  392 root    13992 S asterisk -f
  393 root    13992 S asterisk -f
  394 root    13992 S asterisk -f
  395 root    13992 S asterisk -f
  396 root    13992 S asterisk -f
  397 root    13992 S asterisk -f
  398 root    13992 S asterisk -f
  399 root    13992 S asterisk -f
  400 root    13992 S asterisk -f
  401 root    13992 S asterisk -f
  467 root    13992 S asterisk -f
5315 root    13992 S asterisk -f
15005 root    728 R -sh
15072 root    724 R -sh
15337 root    904 S /usr/bin/dropbear -i 2 > /dev/null
15361 root    13992 S asterisk -f
15363 root    13992 S asterisk -f
15369 root    728 S -sh
15370 root       0 Z [asterisk]
15371 root    716 R ps
26794 root    728 R -sh
root@ip0x:~>

Rank: 2

39^#

發表於 2010-8-20 01:42 | 只看該作者

Thank ckleea. It is seen from the log that Swtichfin and Astfin look more or less the same. There are many asterisk processing running at the same time. It is different from that of CentOS, only one asterisk process is executing.

YH

Rank: 1

40^#

發表於 2010-8-20 07:29 | 只看該作者

I have already made a few firmware now. When I have time, will make the change. Will be sticked at asterisk 1.4

Rank: 2

41^#

發表於 2010-8-26 08:52 | 只看該作者

Any news on SwitchFin?

YH

Rank: 1

42^#

發表於 2010-8-26 10:45 | 只看該作者

Will do so in the next few days. Uptime more than 10 days. CPU utilization back to 4%. Only problem is the slow SSH connection.
I have made a new firmware based on 334 release with attrafax, asterisk 1.4 and GUI 4.0.
Also have brought a USB-RS232 cable for my desktop PC so that I can check to see the boot processes.