bubblestar

這樣設定的話，大家可以把VoIP Gateway / Asterisk Server / OBi110 以指定使用某條WAN 的方式進行溝通，跟其他DATA / BT / Multimedia stream 分開，防止擠塞。

另外，也可用作自己的特定網絡管理通道，跟其他一般User 分開。

其他用法，可以各自各精彩。

角色

More examples on Multiple WANs.

http://www.minitw.com/archives/409

角色

More information on Dual WANs

http://home.swkls.org/mikrotik-dual-wan-routing-packet-flow/

雯雯

剛才聽ckleea兄說bubblestar兄好像差不多完成了RouterOS DHCP Multi WAN, 請賜教!

角色

http://forum.mikrotik.com/viewtopic.php?f=2&t=70715

fems

PCC不指定内网in interface的方法，把in interface条件，换成内部网络地址段（本例中的net_local），适合内部多网段的用户。
PS:增加PCC backup路由的设置。

1. /ip firewall address-list
   
2. add address=192.168.0.0/24 list=net_local
   
3. add address=192.168.1.0/24 list=net_local
   
4. add address=192.168.2.0/24 list=net_local
   
5. #
   
6. /ip firewall mangle
   
7. add  action=accept chain=prerouting dst-address-list=net_local src-address-list=net_local
   
8. #
   
9. /ip firewall mangle
   
10. add action=mark-connection chain=prerouting connection-mark=no-mark \
    
11.     in-interface=pppoe-wan1-out1 new-connection-mark=conn-pcc1
    
12. add action=mark-connection chain=prerouting connection-mark=no-mark \
    
13.     in-interface=pppoe-wan1-out2 new-connection-mark=conn-pcc2
    
14. add action=mark-connection chain=prerouting connection-mark=no-mark \
    
15.     dst-address-type=!local new-connection-mark=conn-pcc1 \
    
16.     per-connection-classifier=both-addresses:2/0
    
17. add action=mark-connection chain=prerouting connection-mark=no-mark \
    
18.     dst-address-type=!local new-connection-mark=conn-pcc2 \
    
19.     per-connection-classifier=both-addresses:2/1
    
20. add action=mark-routing chain=prerouting connection-mark=conn-pcc1 \
    
21.     dst-address-list=!net_local new-routing-mark=route-pcc1 src-address-list=net_local
    
22. add action=mark-routing chain=prerouting connection-mark=conn-pcc2 \
    
23.     dst-address-list=!net_local new-routing-mark=route-pcc2 src-address-list=net_local
    
24. add action=mark-routing chain=output connection-mark=conn-pcc1 \
    
25.     new-routing-mark=route-pcc1
    
26. add action=mark-routing chain=output connection-mark=conn-pcc2 \
    
27.     new-routing-mark=route-pcc2
    
28. #
    
29. /ip route
    
30. add check-gateway=ping comment=router-pcc1 distance=1 gateway=pppoe-wan1-out1 \
    
31.     routing-mark=route-pcc1
    
32. add check-gateway=ping comment=router-pcc2 distance=1 gateway=pppoe-wan1-out2 \
    
33.     routing-mark=route-pcc2
    
34. add check-gateway=ping comment=router-pcc1_backup distance=2 gateway=wan1-out2 \
    
35.     routing-mark=pcc1-route
    
36. add check-gateway=ping comment=router-pcc2_backup distance=2 gateway=wan1-out1 \
    
37.     routing-mark=pcc2-route
    
38. add check-gateway=ping distance=1 gateway=pppoe-wan1-out1
    
39. add check-gateway=ping distance=2 gateway=pppoe-wan1-out2
    
40. #
    
41. /ip firewall nat
    
42. add action=masquerade chain=srcnat out-interface=pppoe-wan1-out1
    
43. add action=masquerade chain=srcnat out-interface=pppoe-wan1-out2

複製代碼