Yes if you have your PBX loaded with operational software on it.
You can use the GUI and HTTP protocol or TFTP protocol to make software update.
As a first step put the uImage-xxx-md5 file so it is http visible. (alternatively tftp visible)
In the PBX GUI go to 'Firmware upgrade' (in the advanced options section) and select HTTP URL. You can reset or keep the PBX configurations using the provided check box.
You need to specify the full path and file name for upgrade including 'http://'.
If you prefer you can update uImage using TFTP protocol instead of HTTP. In this case please specify the IP/host_name of your TFTP server.
You need to specify the uImage file name as well.
The actual software update will happen on the next reboot of the PBX.
但IP01本身的upgrade manual 說，就算見到 bad block 也不用擔心，是正常的。Manual 說:
Notes: During TFTP transfer, successful transferring will show alot of #'s, while timed out requests will display T's instead. Don't worry if it finds some bad blocks during the erasing.
發表於 2010-11-27 16:21
| 
我谂我部机是用不到了，所有固件都试过了，冇一次成功，我唯有放弃了，用串口刷返最新的的ip01算了