返回列表 發帖
The Asterisk Development Team is pleased to announce the release of
DAHDI-Linux 2.5.0.1 and DAHDI-Tools 2.5.0.1.

2.5.0.1 is a bug fix release. It is recommended that current users
of v2.5.0 upgrade.

DAHDI-Linux 2.5.0.1, DAHDI-Tools 2.5.0.1, and DAHDI-Linux-Complete
2.5.0.1+2.5.0.1 are available for immediate download at:

http://downloads.asterisk.org/pub/telephony/dahdi-linux
http://downloads.asterisk.org/pub/telephony/dahdi-tools
http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete

Issues closed by this release:
DAHLIN-245: dahdi_dynamic slip issue with 2 or more TDMoE devices
DAHLIN-248: Outgoing Natively Bridged Call Completely Locks the Box

There is also a fix for the new 2FXS+6FXO modules on Astribank
devices.

The DAHDI-Linux short log from v2.5.0 is:

Doug Bailey (1):
       wcte12xp, wctdm24xxp: Update VPMOCT032 firmware to 1.11.0.

Wagner Gegler (1):
       dahdi_dynamic: Call dahdi_receive in rx packet handler.

Russ Meyerriecks (1):
       wct4xxp: Bug in timing cable with different span density cards

Shaun Ruffell (8):
       wctc4xxp, wcte12xp, wctdm24xxp: Remove check for HAVE_NETDEV_PRIV
       dahdi: Define HAVE_NET_DEVICE_OPS on kernels > 2.6.29
       wcte12xp, wctdm24xxp: Force local interrupts off in the interrupt handler.
       wctc4xxp: Fix lock imbalance in wctc4xxp_watchdog.
       wctdm24xxp: Use our own free list for IRQ commands.
       wctdm: Set 'fastpickup' counter to 8ms
       wctdm24xxp: Set 'fastoffhook' counter to 8ms and turn off calibration delay.

Tzafrir Cohen (3):
       FPGA_1161 rev 9605: EC related bug fixes
       xpp: FXS: new 2+6 module has no digital I/O ports
       xpp: firmware to detect the new 2+6 module

The DAHDI-Tools short log from v2.5.0 is:

Tzafrir Cohen (5):
       Extra README fixes: 'th' and ztcfg
       xpp: pri_termtype: match complete SPAN patterns
       README.Astribank: HWEC and build instructions
       xpp: waitfor_xpds: higher and configurable timeout

And the diff stat for this release from v2.5.0:

drivers/dahdi/dahdi_dynamic.c              |   10 +-
drivers/dahdi/firmware/Makefile            |    2 +-
drivers/dahdi/voicebus/voicebus.c          |    6 +-
drivers/dahdi/voicebus/voicebus_net.c      |   15 -
drivers/dahdi/wct4xxp/base.c               |    2 +-
drivers/dahdi/wctc4xxp/base.c              |   16 +-
drivers/dahdi/wctdm.c                      |    2 +-
drivers/dahdi/wctdm24xxp/base.c            |   61 +-
drivers/dahdi/wctdm24xxp/wctdm24xxp.h      |    1 +
drivers/dahdi/xpp/card_fxs.c               |    2 +-
drivers/dahdi/xpp/firmwares/FPGA_1161.hex  | 2133 ++++++++++++++--------------
drivers/dahdi/xpp/firmwares/PIC_TYPE_1.hex |  733 +++++-----
drivers/dahdi/xpp/firmwares/PIC_TYPE_2.hex |  487 ++++---
include/dahdi/kernel.h                     |    4 +
14 files changed, 1774 insertions(+), 1700 deletions(-)

and in DAHDI-tools:

README                         |    4 +-
xpp/README.Astribank           |   47 ++++++++++++++++++++++++++-------------
xpp/perl_modules/Dahdi/Span.pm |    2 +-
xpp/waitfor_xpds               |    3 +-
4 files changed, 36 insertions(+), 20 deletions(-)

For a full list of changes in these releases, please see the ChangeLog at
http://svn.asterisk.org/svn/dahdi/linux/tags/2.5.0.1/ChangeLog and
http://svn.asterisk.org/svn/dahdi/tools/tags/2.5.0.1/ChangeLog .

Issues found in this release can be reported in the
DAHDI-Linux [1] and DAHDI-Tools [2] projects at
https://issues.asterisk.org/jira

[1] https://issues.asterisk.org/jira/browse/DAHLIN
[2] https://issues.asterisk.org/jira/browse/DAHTOOL

Thank you for your continued support of Asterisk!

--

TOP

The Asterisk Development Team announces the release of Asterisk 1.8.7.0. This
release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

The release of Asterisk 1.8.7.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

Please note that a significant numbers of changes and fixes have gone into
features.c in this release (call parking, built-in transfers, call pickup,
etc.).

NOTE:

Recently, we were notified that the mechanism included in our Asterisk source
code releases to download and build support for the iLBC codec had stopped
working correctly; a little investigation revealed that this occurred because of
some changes on the ilbcfreeware.org website. These changes occurred as a result
of Google's acquisition of GIPS, who produced (and provided licenses for) the
iLBC codec.

If you are a user of Asterisk and iLBC together, and you've already executed a
license agreement with GIPS, we believe you can continue using iLBC with
Asterisk. If you are a user of Asterisk and iLBC together, but you had not
executed a license agreement with GIPS, we encourage you to research the
situation and consult with your own legal representatives to determine what
actions you may want to take (or avoid taking).

More information is available on the Asterisk blog:

http://blogs.asterisk.org/2011/0 ... cquisition-of-gips/

The following is a sample of the issues resolved in this release:

* Added the 'storesipcause' option to sip.conf to allow the user to disable the
setting of HASH(SIP_CAUSE,) on the channel. Having chan_sip set
HASH(SIP_CAUSE,) on the channel carries a significant performance
penalty because of the usage of the MASTER_CHANNEL() dialplan function.

We've decided to disable this feature by default in future 1.8 versions. This
would be an unexpected behavior change for anyone depending on that SIP_CAUSE
update in their dialplan. Please refer to the asterisk-dev mailing list more
information:

http://lists.digium.com/pipermai ... -August/050626.html

* Significant fixes and improvements to parking lots.
(Closes issues ASTERISK-17183, ASTERISK-17870, ASTERISK-17430, ASTERISK-17452,
ASTERISK-17452, ASTERISK-15792. Reported by: David Cabrejos, Remi Quezada,
Philippe Lindheimer, David Woolley, Mat Murdock. Patched by: rmudgett)

* Numerous issues have been reported for deadlocks that are caused by a blocking
read in res_timing_timerfd on a file descriptor that will never be written to.

A change to Asterisk adds some checks to make sure that the timerfd is both
valid and armed before calling read(). Should fix: ASTERISK-18142,
ASTERISK-18197, ASTERISK-18166 and possibly others.
(In essence, this change should make res_timing_timerfd usable.)

* Resolve segfault when publishing device states via XMPP and not connected.
(Closes issue ASTERISK-18078. Reported, patched by: Michael L. Young. Tested
by Jonathan Rose)

* Refresh peer address if DNS unavailable at peer creation.
(Closes issue ASTERISK-18000)

* Fix the missing DAHDI channels when using the newer chan_dahdi.conf sections
for channel configuration.
(Closes issue ASTERISK-18496. Reported by Sean Darcy. Patched by Richard
Mudgett)

* Remove unnecessary libpri dependency checks in the configure script.
(Closes issue ASTERISK-18535. Reported by Michael Keuter. Patched by Richard
Mudgett)

* Update get_ilbc_source.sh script to work again.
(Closes issue ASTERISK-18412)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... k/ChangeLog-1.8.7.0

Thank you for your continued support of Asterisk!

TOP

Thank CK's info for providing an update of the Asterisk.

If we have the Asterisk version 1.8.6 running, do you know the correct procedures to make the current Asterisk 1.8.6 upgrade to 1.8.7?

YH

TOP

Compiling in progress

TOP

How about the old conf files in /etc/asterisk directory? Are they erased/overwritten by the install commands including the make samples?

YH

TOP

回復 153# 角色


Very simple. Just download and compile.
Then stop asterisk before "make install"
make install will then put up the files in the correct location
service asterisk start will do.

No need to install gui again

If you have other modules (my examples are flite, espeak, perhaps chan_dongle), I would suggest to make clean; make; make install again

TOP

Remember don't do a make samples as it will overwrite your default config files.

TOP

回復 155# 角色


  See my answer below. I know you will ask.

This script work for me
  1. #get branch
  2. svn co http://svn.asterisk.org/svn/asterisk/branches/1.8 asterisk-1.8
  3. #get trunk
  4. #svn checkout http://svn.asterisk.org/svn/asterisk/trunk asterisk-1.8
  5. cd asterisk-1.8
  6. ./configure
  7. #this is ony for format MP3 - SVN required
  8. contrib/scripts/get_mp3_source.sh
  9. contrib/scripts/get_ilbc_source.sh
  10. make menuselect
  11. make
複製代碼
You can see I do not include
service asterisk stop
make install
service asterisk start

It is because I need to confirm compilation is ok without error.

For make menuselect, no need to select other sound packages as you have installed before. No need to re-download again

TOP

If the first Asterisk 1.8.6 is stored in /usr/src/asterisk/asterisk-1.8.6, do we overwrite the directory /usr/src/asterisk/asterisk-1.8.6 or create another one like /usr/src/asterisk/asterisk-1.8.7?

YH

TOP

You can see my script. I do not keep my old script. You can have as many source directory as you like. But once you type make install, the binary and other library files will be put into /usr/lib/asterisk, /var/lib/asterisk, etc

The startup script in /etc/init.d is the same.

Only you need to worry about the default config files.

The source code installation script is dfferent from that from rpm package. In rpm package, the existing conf file will not be overwritten but there will be a file backup as rpmsave as extension.

TOP

Copied and thanks.

YH

TOP

Updated to 1.8.7

Asterisk Build:
Asterisk/SVN-branch-1.8-r337898
Asterisk GUI-version : SVN--rexported

TOP

Are you using APL or Asterisk GUI or both in your asterisk box?

YH

TOP

I have already upgraded to Asterisk 1.8.7 too.

YH

TOP

The Asterisk Development Team is pleased to announce the second beta release of
Asterisk 10.0.0. This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

With the release of the Asterisk 10 branch, the preceding '1.' has been removed
from the version number per the blog post available at
http://blogs.digium.com/2011/07/ ... ved-at-asterisk-10/

All interested users of Asterisk are encouraged to participate in the
Asterisk 10 testing process. Please report any issues found to the issue
tracker, https://issues.asterisk.org/jira. It is also very useful to see
successful test reports. Please post those to the asterisk-dev mailing list.

All Asterisk users are invited to participate in the #asterisk-testing
channel on IRC to work together in testing the many parts of Asterisk.

Asterisk 10 is the next major release series of Asterisk. It will be a
Standard support release, similar to Asterisk 1.6.2. For more
information about support time lines for Asterisk releases, see the Asterisk
versions page: https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions

A short list of features includes:

* T.38 gateway functionality has been added to res_fax.

* Protocol independent out-of-call messaging support. Text messages not
 associated with an active call can now be routed through the Asterisk
 dialplan. SIP and XMPP are supported so far.

* New highly optimized and customizable ConfBridge application capable of mixing
 audio at sample rates ranging from 8kHz-192kHz

* Addition of video_mode option in confbridge.conf to provide basic video
 conferencing in the ConfBridge() dialplan application.

* Support for defining hints has been added to pbx_lua.

* Replacement of Berkeley DB with SQLite for the Asterisk Database (AstDB).

* Much, much more!

A full list of new features can be found in the CHANGES file.

http://svnview.digium.com/svn/asterisk/branches/10/CHANGES

For a full list of changes in the current release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... ngeLog-10.0.0-beta2

Thank you for your continued support of Asterisk!

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
             http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
 http://lists.digium.com/mailman/listinfo/asterisk-users

TOP

返回列表