角色

看来Tsintsin要求越来越高。买的东西都是工业用，而不是家用的。

角色

Qnewbie

I bought my Atom machine, ITX-M4S2GAP,  by accident(my relative clicked the photo next to the one I wanted).

At the very first test, it consumes 26~30W due to a usual 300W PSU, one DVD player, and an old 10G HDD. Each one contributes a few Watts. With a 4G CF card and 12V DC PSU, the power consumption stays steadily at 16W. The only problem is SLOW since I try to put ClearOS and asterisk into it. The bottleneck might be the I/O speed of CF card.

With 2.5" HDD(3~4W), the power consumption is below 20W.

TsinTsin

回復 17# Qnewbie
maybe mlc, try slc CF and support UDMA mode


UDMA mode 4 (max 66MB/sec)
UDMA mode 5 (max 100MB/sec)
UDMA mode 6 (max 133MB/sec)

角色

以下的店铺不错，有很多的选择。

http://shop35682086.taobao.com/

角色

角色

回復  角色
我強烈建議你吾好買呢快，PBC Design、BIOS rubbish
除左平，完全山寨味道 ...
TsinTsin 發表於 2010-8-16 13:49

是否可以详细一点呢？你的在哪里买呢？那个时候又买了多少钱呢？


角色

角色

回復 17# Qnewbie

If your relative clicked the one correctly, may I know the model number of the board that you wanted. Do you have any link for that board?

YH

角色

这块ITX-M4S2GAP，卖价也不错，全都是metal-can 电容。

http://item.taobao.com/item.htm?id=3100368345

角色

Qnewbie

回復 21# 角色


    To be honest, I DO forget the model I wanted .

It is AMD-based platform with dual-lan & HD acceleration graphic card. The power consumption is 50W~60W in some reports.

For the mITX board I bought, the web link is http://www.micputer.com/.

ckleea

回復  角色


    To be honest, I DO forget the model I wanted .

It is AMD-based platform with du ...
Qnewbie 發表於 2010-8-17 16:22

Many of the ITX have one RAM slot with max 2 GB. Not enough.

角色

For running orindary Linux, I believe 1G RAM is good enough unless you have additiional programmes to run.

YH

ckleea

I believe you may probably get a better equipped CPU. You may need to install skype connection as well. Each channel takes 40 - 60 MB. You may not need a true xwindow. But if possible, I still recommend to have more memory.

角色

Thank you for your suggestion. I shall consider it when I decide the hardware configuration of my next Asterisk server installed in Hong Kong.

YH

TsinTsin

回復 20# 角色
其實呢塊 致銘 ITX-M4S2GAP 行内應該係出之同一間野
基本上無論用料同PBC Layout都系9成9相似，5同咯只系I/O
致銘就貴D，因爲致銘個名+彩盒包裝+多D配件，麻煩加$100
平100果D買家就會同你講區係生產商，直接從厰發貨~工包，你想要咩I/O、10塊~100塊，幾多都有，貼埋自己牌子都得

我塊rmb$7XX，用左五夠3星期系epc放左

bubblestar

非常認同ckleea 的說法，有時今日買的機子，也要配合未來一段日子的擴充需要的。  如果RAM SLOT 的容量可達 4G 就最理想不過了。

角色

难道我们只可以用D510这样的board？

角色