點解一直fxo無反應無論打出打入都系因為自己自作聰明把fxo設了sip ext！fox是不用設sip ext只要fxs設了然后 ...
dreamy2k 發表於 2010-9-19 09:38 
哈哈！因为我不用GUI，所以打出打入非常清晰的。下面就是一些settings。注意在dahdi_genconf的context（如果打入来去哪里），那么在extensions就要跟随。
在/etc/asterisk/dadhi-channels.conf- ; Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 29 15:00:16 2010
- ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
- ; your manual changes will be LOST.
- ; Dahdi Channels Configurations (chan_dahdi.conf)
- ;
- ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
- ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
- ;
- ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER)
- ;;; line="1 WCTDM/4/0 FXSKS (In use) (SWEC: MG2)"
- signalling=fxs_ks
- callerid=asreceived
- group=0
- context=from-pstn-1
- channel => 1
- callerid=
- group=
- context=default
- ;;; line="2 WCTDM/4/1 FXSKS (In use) (SWEC: MG2)"
- signalling=fxs_ks
- callerid=asreceived
- group=0
- context=from-pstn-2
- channel => 2
- callerid=
- group=
- context=default
- [trunk-PSTN-1]
- exten => _9.,1,Dial(DAHDI/1/${EXTEN:1},,)
- [trunk-PSTN-2]
- exten => _8.,1,Dial(DAHDI/2/${EXTEN:1},,)
- [internal]
- include => trunk-PSTN-1
- include => trunk-PSTN-2
- exten => 3001,1,Dial(SIP/3001,,r)
- exten => 3002,1,Dial(SIP/3002,,r)
- [from-pstn-1]
- exten => s,1,Dial(SIP/3001,,)
- [from-pstn-2]
- exten => s,1,Dial(SIP/3002,,)
|
發表於 2010-9-18 00:50
|