Asterisk 1.6 + FreePBX (Install from AsteriskNOW 1.7) + TDM400P Using Dahdi

角色

因为加卡问题，所以参考下面网页也不成功，不知道members中是否有安装TDM400P和用dahdi driver的经验呢？如果有可否分享一下呢？

http://wiki.contribs.org/FreePBX/DAHDI


角色

角色

先用下面的指令产生一个dahdi-channels.conf

dahdi_genconf

然后把dahdi-channels.conf加入

; inculde TDM400P configuration files
#include dahdi-channels.conf

就可以，当然你加入你要在CLI做dahdi reload。


角色

角色

另外一个方法是在Dahdi module，去edit Analogue Hardware

下載 (12.21 KB)

2010-8-30 08:27

也可以。


角色

角色

I am able to select which fxo port to send the outbound calls. Now all the calls from all fxo ports go to a fixed extensions. When I am trying to route different fxo ports to extensions, it fails.

The way of freepbx's thinking is defferent from Asterisk-GUI. In freepbx, it requires DID/CID for routing. The fxo DID is defined in Zap channel DID.

It is wasting of our time in exploring non-mature GUI: FreePBX.

YH

角色

Since I am not going to use Freepbx, then there is no installation manual for freepbx + TDM400P is provided.

YH

角色

It is pretty simple that you install CentOS and yum for Asterisk. That is it.

YH