yiucsw

IP01 updated to 474, seems better response.

yiucsw

FXO trunk - password? or disable incoming call.
I want to disable incoming call, or wait for few minute before answer the call. where can it set?

yiucsw

sorry when user call in, the switchfin boardcast an message ...asterisk is an open source... iax extension, how can i cancel the message. and wait for 20 min before answer. I think it may be voicemail system.

yiucsw

i believe it is some setup issue. there is no problem for outgoing call, but for incoming call from FXO, an voice file is play....thank you for installing asterisk open source pbx.....
As i do not need incoming call, can you tell me how to disable the voice message.

i try to add the following:
exten=s,1,wait(1000)
but no effect.

yiucsw

I put the following in
file extensions_custom.conf section [DID_trunk_1_default]
exten=_X.,1,Hangup
Still there is no effect.
When call from outside to PSTN, it direct go to Voice message"thank you for install asterisk PBX....."

yiucsw

The following is from asterisk log.


[Feb  1 13:26:32] NOTICE[528] chan_dahdi.c: Got event 18 (Ring Begin)...
[Feb  1 13:26:33] NOTICE[528] chan_dahdi.c: Got event 2 (Ring/Answered)...
[Feb  1 13:27:34] NOTICE[681] cdr.c: CDR simple logging enabled.

yiucsw

i use build-in incoming calling rule, but no effect.
No, i delete all analog/voip trunk, all incoming/outgoing rule most user, still when dail in to PSTN. the asterisk stay play the message :"congulation, thank you for install Asterisk open source...."

Help...

yiucsw

after reset to default, and reboot many time, the system now resume... need to test again.
need to start over again.

yiucsw

after recreat the analog trunk, the welcome voice playback is coming back......, any suggestion

yiucsw

no matter how many time i press the reset to default button and reboot, there is no change to the system. so I believe i need to reflash it again.
I am using 474, any new firmware that i can download.......

yiucsw

find exten_custom.conf -> default
delete include=demo
reboot.

enable analog trunk. same result. playback demo voice file. "Conguralation..." when call in.

yiucsw

just search extensions.conf and exten_custom.conf both do not contain welcome or play keyword.

yiucsw

reflash the system with 474, still have the welcome voice message after enable analog trunk.
no extension has been added, just add analog trunk.

yiucsw

thank,
yes, it is blank.

yiucsw

thanks,
I find it in exten_custom.conf,  change it to
exten => s,1,Wait(100000). and hope there is no side effect.