ijlyniqi

都唔便,,不过我现在用住RB951UI移动网络单线三并拨都够晒用,台旧RB450G准备闲鱼出掉

ijlyniqi

回復 18# 167pk


    系啊,,就系多佐个无线功能,仲有CPU都强佐D,仲有个USB接口可以接个U盘做SMB

ijlyniqi

回復 21# yiucsw


   都差唔多原理，就系单线同一时间三次同步拨号叠加网速，对路由咖CPU要求比较高点，我之前只个ＲＢ４５０Ｇ都系只能进行两个并拨号到顶了，衣家尼个9５１IU超频之后可以上到三个并拨号，反正大陆尼边咖运营商都基本限佐多拨号，并拨号系目前有效咖解决方法

ijlyniqi

回復 24# yiucsw


/interface vrrp
add interface=ether5 name=vrrp1
add interface=ether5 name=vrrp2 vrid=2
add interface=ether5 name=vrrp3 vrid=3

/interface pppoe-client
add disabled=no interface=vrrp1 max-mru=1480 max-mtu=1480 mrru=1600 name=\
    pppoe-out1 password=123 user=123
add disabled=no interface=vrrp2 max-mru=1480 max-mtu=1480 mrru=1600 name=\
    pppoe-out2 password=123 user=123
add disabled=no interface=vrrp3 max-mru=1480 max-mtu=1480 mrru=1600 name=\
    pppoe-out3 password=123 user=123


/ip pool
add name=pool1 ranges=10.0.1.0-10.0.1.254
/ip dhcp-server
add address-pool=pool1 disabled=no interface=bridge1 name=server1


/ip address
add address=10.0.0.1/16 interface=bridge1 network=10.0.0.0
add address=0.0.0.1 interface=vrrp1 network=0.0.0.1
add address=0.0.0.2 interface=vrrp2 network=0.0.0.2
add address=0.0.0.3 interface=vrrp3 network=0.0.0.3
add address=0.0.5.5 interface=ether5 network=0.0.5.5


/ip dhcp-server network
add address=10.0.0.0/16 dns-server=10.0.0.1 gateway=10.0.0.1

IP池请换回比较常用的192.168.X.X设置
负载部分请参考比较流行的PCC或NTH,这方面我使用是基于ECMP负载方式,具体细节不方便标出

ijlyniqi

回復 26# yiucsw


    我睇距得16MB唔够用,无话分区,想安装完整咖模块都好似唔够

ijlyniqi

回復 28# yiucsw


  我觉得RAM和ROM至少要大于64M,当然CPU要越劲越好,其它咖就睇住来

ijlyniqi

回復 30# yiucsw

我衣家就系用紧Mikrotik RB951Ui-2HnD超到最高750MHZ都稳定,之前咖Rb450G超到最高800MHZ就经常重启
如何你无必要一定用5G无线,差唔多咖价钱建议入手Mikrotik RB2011UiAS-2HnD-IN