ckleea

Please reboot again and use your serial cable to see what on.
check ifconfig for the network setting.
change /persistent/etc/network.conf and /persistent/etc/asterisk/rc_org.conf, the DHCP to yes
reboot to see if it works.

ckleea

SVN 437 should have the DHCP enable in the firmware.

ckleea

The latest svn firmware so far is still 458

ckleea

回復 218# Qnewbie

please test your box first, no hurry as other encountered problems in the conversion from atcom to switchfin firmware.

ckleea

回復 218# Qnewbie

I can't remember SVN 456 with DHCP enable by default. But always prepare the IP01 return to default 192.168.1.100
On hand get a serial cable to look at the console output from IP01

ckleea

回復 221# Qnewbie

Glad to hear you are working well. Our advice is to set to svn437 at most. After that, there are some changes in the conf files such as extensions.conf move to extensions_custom.conf, etc. I am not sure the impact.

ckleea

回復 225# bubblestar


    相信是本身network setup 的小問題

ckleea

回復 227# 亞星


    我都試過，係唔響

ckleea

估計NAT problem account for the most problem but there may be something affecting the SIP connection.

ckleea

Just to let everyone know that my IP01 box has been successfully relocated to London, UK. It works with a few setup.

ckleea

GUI has been rewritten for even faster response since SVN 432.
It allows web unpload of firmware i.e. just like usual browser to upload a file
After that, it has extensions_custom.conf.

ckleea

Wait for while and let the download stop. Likely that it is downloading from digium.

Then reboot in 15 to 20 min and see if GUI can login.

ckleea

congratulation

ckleea

Time interval allows you to set when to answer call and when not.

Click the help next to pattern, s = all call

ckleea

Should stay at 437