Switchfin firmware on ATCOM IP01 - VoIP 研究室 - 電訊茶室

Rank: 1

91^# 跳轉到 »

發表於 2010-11-2 22:28 | 顯示全部帖子

I have another restore instruction. This is the same.

Rank: 1

92^#

發表於 2010-11-3 05:34 | 顯示全部帖子

本帖最後由 ckleea 於 2010-11-3 05:36 編輯

回復 140# bubblestar

Glad to hear you are ok.
One more tool you need. You may download the puttytel which is a freeware. Same as hyperterminal.

Read this again.

http://www.fredshack.com/docs/atcom_ip01.html

If you wish to carry on the trial, you can put the md5 image into /persistent/imageupdate directory, reboot use the RS232 console to look at the boot process. You may also need to manually restart the vland dahdi service as I describe.

Once you see the 3 green lights are one, your IP01 is correctly booted. Remember that the network IP address may not be the one you want.

Rank: 1

93^#

發表於 2010-11-3 10:47 | 顯示全部帖子

本帖最後由 ckleea 於 2010-11-3 10:48 編輯

回復 142# bubblestar

Puttytel is just a variant of putty. It also does serial port communication. For example, my USB RS232 dongle uses COM10.

Size is different a lot. Switchfin has included a lot more packages. Better cron jobs and fax support by default.

SO if you reflash the firmware by ext2 file, you must follow the guide from atcom and use original atcom firmware. Once you are back, you can use the Atcom gui to upload the new firmware. Almost all the firmware I compiled are between 8.2 to 8.6 MB. It will close to the maximum size allowed. The compiled error you encountered in the first instance was the too big size problem I believe.

There are few more things to note
1. the firmware default not enable log so it saves some space
2. if you enable g729, it will download quite a number of g729 files from asterisk site. It takes some times.
3. network ip issues I mentioned

Rank: 1

94^#

發表於 2010-11-3 23:06 | 顯示全部帖子

本帖最後由 ckleea 於 2010-11-3 23:09 編輯

回復 145# bubblestar
Don't know why.
Please get back to the ATCOM firmware. I will do the remaining for you.

Rank: 1

95^#

發表於 2010-11-15 20:51 | 顯示全部帖子

很久沒有更新，仲係svn 438！

Rank: 1

96^#

發表於 2010-11-15 20:51 | 顯示全部帖子

回復 148# bubblestar

How is your new IP01? Working very well. Do you encounter any problem?

Rank: 1

97^#

發表於 2010-11-20 22:04 | 顯示全部帖子

回復 151# bubblestar

A new firmware image has been built. snv 443. No idea what has included or bug fixed.

Rank: 1

98^#

發表於 2010-11-27 16:44 | 顯示全部帖子

SMS support in Switchfin

Friday, 26 November 2010 17:55

Hi Guys,

SMS support was added in Switchfin.

In order to use it please compile Switchfin trunk for IP02/IP04/IP08 target with GSM1 support.
You need to have GSM1 module plugged in your PBX

Now you will be able to check if new short message is available using the following syntax:

/bin/gsm-sms /dev/dahdi/wcgsm smscount

, get the message using the syntax

/bin/gsm-sms /dev/dahdi/wcgsm smsget

If you need to send a message just type

/bin/gsm-sms /dev/dahdi/wcgsm smssend number "Text of the message"

Comments are welcome. Cheers!