ckleea

Compiling in progress

ckleea

回復 153# 角色


Very simple. Just download and compile.
Then stop asterisk before "make install"
make install will then put up the files in the correct location
service asterisk start will do.

No need to install gui again

If you have other modules (my examples are flite, espeak, perhaps chan_dongle), I would suggest to make clean; make; make install again

ckleea

Remember don't do a make samples as it will overwrite your default config files.

ckleea

回復 155# 角色


  See my answer below. I know you will ask.

This script work for me

1. #get branch
   
2. svn co http://svn.asterisk.org/svn/asterisk/branches/1.8 asterisk-1.8
   
3. #get trunk
   
4. #svn checkout http://svn.asterisk.org/svn/asterisk/trunk asterisk-1.8
   
5. cd asterisk-1.8
   
6. ./configure
   
7. #this is ony for format MP3 - SVN required
   
8. contrib/scripts/get_mp3_source.sh
   
9. contrib/scripts/get_ilbc_source.sh
   
10. make menuselect
    
11. make

複製代碼

You can see I do not include
service asterisk stop
make install
service asterisk start

It is because I need to confirm compilation is ok without error.

For make menuselect, no need to select other sound packages as you have installed before. No need to re-download again

ckleea

You can see my script. I do not keep my old script. You can have as many source directory as you like. But once you type make install, the binary and other library files will be put into /usr/lib/asterisk, /var/lib/asterisk, etc

The startup script in /etc/init.d is the same.

Only you need to worry about the default config files.

The source code installation script is dfferent from that from rpm package. In rpm package, the existing conf file will not be overwritten but there will be a file backup as rpmsave as extension.

ckleea

Updated to 1.8.7

Asterisk Build:
Asterisk/SVN-branch-1.8-r337898
Asterisk GUI-version : SVN--rexported

ckleea

The Asterisk Development Team is pleased to announce the second beta release of
Asterisk 10.0.0. This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

With the release of the Asterisk 10 branch, the preceding '1.' has been removed
from the version number per the blog post available at
http://blogs.digium.com/2011/07/ ... ved-at-asterisk-10/

All interested users of Asterisk are encouraged to participate in the
Asterisk 10 testing process. Please report any issues found to the issue
tracker, https://issues.asterisk.org/jira. It is also very useful to see
successful test reports. Please post those to the asterisk-dev mailing list.

All Asterisk users are invited to participate in the #asterisk-testing
channel on IRC to work together in testing the many parts of Asterisk.

Asterisk 10 is the next major release series of Asterisk. It will be a
Standard support release, similar to Asterisk 1.6.2. For more
information about support time lines for Asterisk releases, see the Asterisk
versions page: https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions

A short list of features includes:

* T.38 gateway functionality has been added to res_fax.

* Protocol independent out-of-call messaging support. Text messages not
 associated with an active call can now be routed through the Asterisk
 dialplan. SIP and XMPP are supported so far.

* New highly optimized and customizable ConfBridge application capable of mixing
 audio at sample rates ranging from 8kHz-192kHz

* Addition of video_mode option in confbridge.conf to provide basic video
 conferencing in the ConfBridge() dialplan application.

* Support for defining hints has been added to pbx_lua.

* Replacement of Berkeley DB with SQLite for the Asterisk Database (AstDB).

* Much, much more!

A full list of new features can be found in the CHANGES file.

http://svnview.digium.com/svn/asterisk/branches/10/CHANGES

For a full list of changes in the current release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... ngeLog-10.0.0-beta2

Thank you for your continued support of Asterisk!

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
             http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
 http://lists.digium.com/mailman/listinfo/asterisk-users

ckleea

I  have done it before but support is limited before. Noew I am trying at VM at my atom server and will install the new beta again later

ckleea

The Asterisk Development Team has announced a security release for Asterisk 1.8.
The available security release is released as version 1.8.7.1.

This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/releases

The release of Asterisk 1.8.7.1 resolves an issue with SIP URI parsing which can
lead to a remotely exploitable crash:

   Remote Crash Vulnerability in SIP channel driver (AST-2011-012)

The issue and resolution is described in the AST-2011-012 security
advisory.

For more information about the details of this vulnerability, please read the
security advisory AST-2011-012, which was released at the same time as this
announcement.

For a full list of changes in the current release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... s/ChangeLog-1.8.7.1

Security advisory AST-2011-012 is available at:

http://downloads.asterisk.org/pub/security/AST-2011-012.pdf

Thank you for your continued support of Asterisk!

ckleea

回復 170# 角色


   Any problems encountered? I have two asterisk servers updated. No problem so far.

ckleea

The Asterisk Development Team is pleased to announce the release of
DAHDI-Linux 2.5.0.2 and DAHDI-Tools 2.5.0.2.

2.5.0.2 is a bug fix release. It is recommended that current users of v2.5 to
upgrade.

DAHDI-Linux 2.5.0.2, DAHDI-Tools 2.5.0.2, and DAHDI-Linux-Complete
2.5.0.1+2.5.0.1 are available for immediate download at:

http://downloads.asterisk.org/pub/telephony/dahdi-linux
http://downloads.asterisk.org/pub/telephony/dahdi-tools
http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete

Issues closed by this release:
DAHLIN-257: wcb4xxp shows hardware EC in /proc/dahdi/* for B410P although vpmsupport=0
DAHLIN-260: wctdm24xxp/base.c fails to compile in 2.6.16 kernel

The DAHDI-Linux short log from v2.5.0.1 is:

Shaun Ruffell (8):
       dahdi: Decrease the initial coretimer delay to 4ms from 1 second.
       wctdm24xxp, wcte12xp: Advertise VPMOCT032 presence in dahdi_span.devicetype.
       dahdi: Check for master in DAHDI_STARTUP / resolves MeetMe regression.
       wctdm24xxp: Set dahdi_span.devicetype string in one place.
       wctc4xxp: Allow G723 SID frames to pass to the hardware decoder.
       wct4xxp: Fix condition where hardware echo canceler erroneously mutes DTMF.
       wcb4xxp: Do not show LASVEGAS2 as echocan name if vpmsupport is set to 0
       dahdi: Move WARN_ON_ONCE from wctc4xxp driver to include/dahdi/kernel.h

Tzafrir Cohen (1):
       xpp: fxs: bugfix for 2fxs+6fxo cards

The DAHDI-Tools short log from v2.5.0.1 is:

Shaun Ruffell (2):
       dahdi_genconf: Assume spans with unknown term types are software selectable.
       dahdi_genconf: Use 'dahdi_scan' to determine span_type for B410P cards.

And the diff stat for this release from v2.5.0.1 is:

drivers/dahdi/dahdi-base.c      |    6 +++++-
drivers/dahdi/wcb4xxp/base.c    |    2 +-
drivers/dahdi/wct4xxp/base.c    |    2 --
drivers/dahdi/wctc4xxp/base.c   |   21 ++++-----------------
drivers/dahdi/wctdm24xxp/base.c |   31 +++++++++++++++++++++++--------
drivers/dahdi/wcte12xp/base.c   |    8 +++++++-
drivers/dahdi/xpp/card_fxs.c    |   39 +++++++++++++++++++++++++++++++--------
include/dahdi/kernel.h          |   13 +++++++++++++
8 files changed, 84 insertions(+), 38 deletions(-)

and for DAHDI-Tools:

xpp/perl_modules/Dahdi/Span.pm |   37 +++++++++++++++++++++++++++++++++++--
1 files changed, 35 insertions(+), 2 deletions(-)

For a full list of changes in these releases, please see the ChangeLog at
http://svn.asterisk.org/svn/dahdi/linux/tags/2.5.0.2/ChangeLog and
http://svn.asterisk.org/svn/dahdi/tools/tags/2.5.0.2/ChangeLog .

Issues found in this release can be reported in the
DAHDI-Linux [1] and DAHDI-Tools [2] projects at
https://issues.asterisk.org/jira

[1] https://issues.asterisk.org/jira/browse/DAHLIN
[2] https://issues.asterisk.org/jira/browse/DAHTOOL

Thank you for your continued support of Asterisk!

ckleea

回復 174# bubblestar


    估計你今天都會幾忙

ckleea

I just completed the dadhi update

ckleea

回復 178# 角色

I do not need dahdi as I do not have any hardware card but I found it buggy in the previous version and so I make an installation.

I also make another asterisk compilation and installation this afternoon.

ckleea

The Asterisk Development Team is pleased to announce the first release candidate
of Asterisk 10.0.0. This release candidate is available for immediate download
at http://downloads.asterisk.org/pub/telephony/asterisk/

All Asterisk users are encouraged to participate in the Asterisk 10 testing
process. Please report any issues found to the issue tracker,
https://issues.asterisk.org/jira. It is also very useful to see successful test
reports. Please post those to the asterisk-dev mailing list.

All Asterisk users are invited to participate in the #asterisk-testing
channel on IRC to work together in testing the many parts of Asterisk.

Asterisk 10 is the next major release series of Asterisk. It will be a
Standard support release, similar to Asterisk 1.6.2. For more
information about support time lines for Asterisk releases, see the Asterisk
versions page: https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions

A short list of features includes:

* T.38 gateway functionality has been added to res_fax.
* Protocol independent out-of-call messaging support. Text messages not
associated with an active call can now be routed through the Asterisk
dialplan. SIP and XMPP are supported so far.
* New highly optimized and customizable ConfBridge application capable of mixing
audio at sample rates ranging from 8kHz-192kHz
(More information available at
  https://wiki.asterisk.org/wiki/display/AST/ConfBridge+10 )
* Addition of video_mode option in confbridge.conf to provide basic video
conferencing in the ConfBridge() dialplan application.
* Support for defining hints has been added to pbx_lua.
* Replacement of Berkeley DB with SQLite for the Asterisk Database (AstDB).
* Much, much more!

A full list of new features can be found in the CHANGES file.

http://svnview.digium.com/svn/asterisk/branches/10/CHANGES

For a full list of changes in the current release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... hangeLog-10.0.0-rc1

Thank you for your continued support of Asterisk!