ckleea

It is likely the glibc update recently. I am trying to reinstall everything from backup

ckleea

probably more than that.

ckleea

回復 127# bubblestar

Don't try to remove the glibc! It is very important binary and library for the system.

ckleea

回復 129# bubblestar


What problem you encounter is that you cannot login in from GUI? It breaks in the loading of extensions.conf. and on second time login , it will return a failed loading page i.e. cannot access. Something in relationship with the AMI interface that gui works with.

It is not a big deal indeed but it is a miss for me after the system is working for every bit for quite some time.

ckleea

The Asterisk Development Team announces the release of Asterisk 1.8.5.0. This
release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

The release of Asterisk 1.8.5.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following is a sample of the issues resolved in this release:

* Fix Deadlock with attended transfer of SIP call
(Closes issue #18837. Reported, patched by alecdavis. Tested by Irontec, ZX81,
cmaj)

* Fixes thread blocking issue in the sip TCP/TLS implementation.
(Closes issue #18497. Reported by vois. Patched by dvossel. Tested by vois,
rossbeer, kowalma, Freddi_Fonet)

* Be more tolerant of what URI we accept for call completion PUBLISH requests.
(Closes issue #18946. Reported by GeorgeKonopacki. Patched by mmichelson)

* Fix a nasty chanspy bug which was causing a channel leak every time a spied on
channel made a call.
(Closes issue #18742. Reported by jkister. Tested by jcovert, jrose)

* This patch fixes a bug with MeetMe behavior where the 'P' option for always
prompting for a pin is ignored for the first caller.
(Closes issue #18070. Reported by mav3rick. Patched by bbryant)

* Fix issue where Asterisk does not hangup a channel after endpoint hangs up. If
the call that the dialplan started an AGI script for is hungup while the AGI
script is in the middle of a command then the AGI script is not notified of
the hangup.
(Closes issue #17954, #18492. Reported by mn3250, devmod. Patched by rmudgett)

* Resolve issue where leaving a voicemail, the MWI message is never sent. The
same thing happens when checking a voicemail and marking it as read.
(Closes issue ASTERISK-18002. Reported by Leif Madsen. Resolved by Richard
Mudgett)

* Resolve issue where wait for leader with Music On Hold allows crosstalk
between participants. Parenthesis in the wrong position. Regression from issue
#14365 when expanding conference flags to use 64 bits.
(Closes issue #18418. Reported by MrHanMan. Patched by rmudgett)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... k/ChangeLog-1.8.5.0

Thank you for your continued support of Asterisk!

ckleea

現在 GUI 可以用到！

ckleea

The Asterisk Development Team is pleased to announce the release of
DAHDI-Linux and DAHDI-Tools version 2.5.0

DAHDI-Linux 2.5.0, DAHDI-Tools 2.5.0 and DAHDI-Linux-Complete
2.5.0+2.5.0 are available for immediate download at:

http://downloads.asterisk.org/pub/telephony/dahdi-linux
http://downloads.asterisk.org/pub/telephony/dahdi-tools
http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete

2.5.0 is a feature release and builds against kernels from 2.6.9 up to
and including 3.0. Some of the more notable changes from the 2.4.0
release are:

General DAHDI Changes:

* Software and Hardware (if available) echo cancellation can be mixed on a
line if desired. This also allows hardware echo cancellation to be disabled
without reloading the drivers.

* Channels can be configured to generate channel events when there are
data under runs or over runs. Can be used when tracking down the source of
data skips.

* Debug flag can be set to show RBS bit changes in kernel log.

* Much refactoring in in dahdi-base to enable tighter integration with udev /
sysfs in upcoming releases.

Updated Drivers:

* wctdm24xxp, wcte12xp: Added support for VPMOCT032 hardware echo
cancellation module.

* wctdm24xxp: Fix regression with forward disconnect.

* wctdm24xxp, wcte12xp: Decrease the amount of time spent in the interrupt
handler.

* wctdm24xxp: Added fastpickup module parameter to help with type-II caller id
detection.

* wcte12xp: Properly recognizes loopup / loopdown signals.

* wct4xxp: Reduced kernel memory footprint and stack usage.

* wct4xxp: Added module parameter to allow the rotary switch settings to be
ignored at module load time.

* wcb4xxp: Support for beroNet BN4S0e PCI Express card.

* xpp: support for a hardware echo canceller.
Requires "octasic" support in dahdi-tools (as of 2.5) and the
firmware from http://updates.xorcom.com/astribank/hwec/

* xpd_fxs - added parameter ring_trapez for a trapezoid (stronger) ring.

Changes to DAHDI-tools:

* xpp: low-level USB tools can now use a relative -D mmm/nnn instead of
a full -D /dev/bus/usb/mmm/nnn .

* xpp: Octasic support: oct612x code included to allow loading the
Astribank hardware echo canceller module's firmware.

* xpp: xpp_order doesn't work when more then 9 ABs are listed
(xpp/perl_modules/Dahdi/Xpp.pm)

For a full list of changes in these releases, please see the ChangeLogs at
http://svn.asterisk.org/svn/dahdi/linux/tags/2.5.0/ChangeLog and
http://svn.asterisk.org/svn/dahdi/tools/tags/2.5.0/ChangeLog

Issues found in these release candidates can be reported in the
DAHDI-Linux [1] or DAHDI-tools project [2] at
https://issues.asterisk.org/jira

[1] https://issues.asterisk.org/jira/browse/DAHLIN
[2] https://issues.asterisk.org/jira/browse/DAHTOOL

Thank you for your continued support of Asterisk!

ckleea

The Asterisk Development Team announces the release of Asterisk 1.8.6.0. This
release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

The release of Asterisk 1.8.6.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following is a sample of the issues resolved in this release:

* Fix an issue with Music on Hold classes losing files in playlist when realtime
is used.
(Closes issue ASTERISK-17875. Reported by David Cunningham. Patched by Igor
Goncharovsky)

* Resolve a potential crash in chan_sip when utilizing auth= and performing a
'sip reload' from the console.
(Closes issue ASTERISK-17939. Reported by wdoekes. Patched by Richard Mudgett)

* Address some improper sql statements in res_odbc that would cause an update
to fail on realtime peers due to trying to set as "(NULL)" rather than an
actual NULL.
(Closes issue ASTERISK-17791. Reported by marcelloceschia. Patched by Tilghman
Lesher)

* Resolve issue where 403 Forbidden would always be sent maximum number of times
regardless to receipt of ACK.
(Patched by Richard Mudgett)

* Resolve issue where if a call to MeetMe includes both the dynamic(D) and
always request PIN(P) options, MeetMe will ask for the PIN two times: once for
creating the conference and once for entering the conference.
(Patched by Kinsey Moore)

* Fix New Zealand indications profile based on
http://www.telepermit.co.nz/TNA102.pdf
(Closes issue ASTERISK-16263. Reported, Patched by richardf)

* Segfault in shell_helper in func_shell.c
(Closes issue ASTERISK-18109. Reported by Michael Myles, patched by Richard
Mudgett)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... k/ChangeLog-1.8.6.0

Thank you for your continued support of Asterisk!

ckleea

What I think is to get an AsteriskNow image to have every library ready and then upgrade to Centos 5.6; compile asterisk 1.8.6, finally other things you want

ckleea

I updated this morning

ckleea

回復 143# 角色

Running well. No problem noted.

ckleea

I just download the source and do my compilation. I haven't done any yum install or yum update for long time. Sometimes the rpm packages do not have the features that I include

ckleea

If you need realtime and mp3 moh, these are examples. The things quoted by Bubblestar Ching are more than usual users requirement. Other things I usually recompile is asterisk to flute and espeak modules. I can post up my simple bash files to do download and make menuselect when I am back to HK.

ckleea

The Asterisk Development Team is pleased to announce the release of
DAHDI-Linux 2.5.0.1 and DAHDI-Tools 2.5.0.1.

2.5.0.1 is a bug fix release. It is recommended that current users
of v2.5.0 upgrade.

DAHDI-Linux 2.5.0.1, DAHDI-Tools 2.5.0.1, and DAHDI-Linux-Complete
2.5.0.1+2.5.0.1 are available for immediate download at:

http://downloads.asterisk.org/pub/telephony/dahdi-linux
http://downloads.asterisk.org/pub/telephony/dahdi-tools
http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete

Issues closed by this release:
DAHLIN-245: dahdi_dynamic slip issue with 2 or more TDMoE devices
DAHLIN-248: Outgoing Natively Bridged Call Completely Locks the Box

There is also a fix for the new 2FXS+6FXO modules on Astribank
devices.

The DAHDI-Linux short log from v2.5.0 is:

Doug Bailey (1):
       wcte12xp, wctdm24xxp: Update VPMOCT032 firmware to 1.11.0.

Wagner Gegler (1):
       dahdi_dynamic: Call dahdi_receive in rx packet handler.

Russ Meyerriecks (1):
       wct4xxp: Bug in timing cable with different span density cards

Shaun Ruffell (8):
       wctc4xxp, wcte12xp, wctdm24xxp: Remove check for HAVE_NETDEV_PRIV
       dahdi: Define HAVE_NET_DEVICE_OPS on kernels > 2.6.29
       wcte12xp, wctdm24xxp: Force local interrupts off in the interrupt handler.
       wctc4xxp: Fix lock imbalance in wctc4xxp_watchdog.
       wctdm24xxp: Use our own free list for IRQ commands.
       wctdm: Set 'fastpickup' counter to 8ms
       wctdm24xxp: Set 'fastoffhook' counter to 8ms and turn off calibration delay.

Tzafrir Cohen (3):
       FPGA_1161 rev 9605: EC related bug fixes
       xpp: FXS: new 2+6 module has no digital I/O ports
       xpp: firmware to detect the new 2+6 module

The DAHDI-Tools short log from v2.5.0 is:

Tzafrir Cohen (5):
       Extra README fixes: 'th' and ztcfg
       xpp: pri_termtype: match complete SPAN patterns
       README.Astribank: HWEC and build instructions
       xpp: waitfor_xpds: higher and configurable timeout

And the diff stat for this release from v2.5.0:

drivers/dahdi/dahdi_dynamic.c              |   10 +-
drivers/dahdi/firmware/Makefile            |    2 +-
drivers/dahdi/voicebus/voicebus.c          |    6 +-
drivers/dahdi/voicebus/voicebus_net.c      |   15 -
drivers/dahdi/wct4xxp/base.c               |    2 +-
drivers/dahdi/wctc4xxp/base.c              |   16 +-
drivers/dahdi/wctdm.c                      |    2 +-
drivers/dahdi/wctdm24xxp/base.c            |   61 +-
drivers/dahdi/wctdm24xxp/wctdm24xxp.h      |    1 +
drivers/dahdi/xpp/card_fxs.c               |    2 +-
drivers/dahdi/xpp/firmwares/FPGA_1161.hex  | 2133 ++++++++++++++--------------
drivers/dahdi/xpp/firmwares/PIC_TYPE_1.hex |  733 +++++-----
drivers/dahdi/xpp/firmwares/PIC_TYPE_2.hex |  487 ++++---
include/dahdi/kernel.h                     |    4 +
14 files changed, 1774 insertions(+), 1700 deletions(-)

and in DAHDI-tools:

README                         |    4 +-
xpp/README.Astribank           |   47 ++++++++++++++++++++++++++-------------
xpp/perl_modules/Dahdi/Span.pm |    2 +-
xpp/waitfor_xpds               |    3 +-
4 files changed, 36 insertions(+), 20 deletions(-)

For a full list of changes in these releases, please see the ChangeLog at
http://svn.asterisk.org/svn/dahdi/linux/tags/2.5.0.1/ChangeLog and
http://svn.asterisk.org/svn/dahdi/tools/tags/2.5.0.1/ChangeLog .

Issues found in this release can be reported in the
DAHDI-Linux [1] and DAHDI-Tools [2] projects at
https://issues.asterisk.org/jira

[1] https://issues.asterisk.org/jira/browse/DAHLIN
[2] https://issues.asterisk.org/jira/browse/DAHTOOL

Thank you for your continued support of Asterisk!

--

ckleea

The Asterisk Development Team announces the release of Asterisk 1.8.7.0. This
release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/asterisk/

The release of Asterisk 1.8.7.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

Please note that a significant numbers of changes and fixes have gone into
features.c in this release (call parking, built-in transfers, call pickup,
etc.).

NOTE:

Recently, we were notified that the mechanism included in our Asterisk source
code releases to download and build support for the iLBC codec had stopped
working correctly; a little investigation revealed that this occurred because of
some changes on the ilbcfreeware.org website. These changes occurred as a result
of Google's acquisition of GIPS, who produced (and provided licenses for) the
iLBC codec.

If you are a user of Asterisk and iLBC together, and you've already executed a
license agreement with GIPS, we believe you can continue using iLBC with
Asterisk. If you are a user of Asterisk and iLBC together, but you had not
executed a license agreement with GIPS, we encourage you to research the
situation and consult with your own legal representatives to determine what
actions you may want to take (or avoid taking).

More information is available on the Asterisk blog:

http://blogs.asterisk.org/2011/0 ... cquisition-of-gips/

The following is a sample of the issues resolved in this release:

* Added the 'storesipcause' option to sip.conf to allow the user to disable the
setting of HASH(SIP_CAUSE,) on the channel. Having chan_sip set
HASH(SIP_CAUSE,) on the channel carries a significant performance
penalty because of the usage of the MASTER_CHANNEL() dialplan function.

We've decided to disable this feature by default in future 1.8 versions. This
would be an unexpected behavior change for anyone depending on that SIP_CAUSE
update in their dialplan. Please refer to the asterisk-dev mailing list more
information:

http://lists.digium.com/pipermai ... -August/050626.html

* Significant fixes and improvements to parking lots.
(Closes issues ASTERISK-17183, ASTERISK-17870, ASTERISK-17430, ASTERISK-17452,
ASTERISK-17452, ASTERISK-15792. Reported by: David Cabrejos, Remi Quezada,
Philippe Lindheimer, David Woolley, Mat Murdock. Patched by: rmudgett)

* Numerous issues have been reported for deadlocks that are caused by a blocking
read in res_timing_timerfd on a file descriptor that will never be written to.

A change to Asterisk adds some checks to make sure that the timerfd is both
valid and armed before calling read(). Should fix: ASTERISK-18142,
ASTERISK-18197, ASTERISK-18166 and possibly others.
(In essence, this change should make res_timing_timerfd usable.)

* Resolve segfault when publishing device states via XMPP and not connected.
(Closes issue ASTERISK-18078. Reported, patched by: Michael L. Young. Tested
by Jonathan Rose)

* Refresh peer address if DNS unavailable at peer creation.
(Closes issue ASTERISK-18000)

* Fix the missing DAHDI channels when using the newer chan_dahdi.conf sections
for channel configuration.
(Closes issue ASTERISK-18496. Reported by Sean Darcy. Patched by Richard
Mudgett)

* Remove unnecessary libpri dependency checks in the configure script.
(Closes issue ASTERISK-18535. Reported by Michael Keuter. Patched by Richard
Mudgett)

* Update get_ilbc_source.sh script to work again.
(Closes issue ASTERISK-18412)

For a full list of changes in this release, please see the ChangeLog:

http://downloads.asterisk.org/pu ... k/ChangeLog-1.8.7.0

Thank you for your continued support of Asterisk!