Switchfin firmware on ATCOM IP01 - VoIP 研究室 - 電訊茶室

Rank: 1

181^# 跳轉到 »

發表於 2011-2-13 21:56 | 顯示全部帖子

回復 399# 角色

I skip this.

Rank: 1

182^#

發表於 2011-2-13 22:23 | 顯示全部帖子

The DHCP version has been compiled.

Rank: 1

183^#

發表於 2011-2-13 22:34 | 顯示全部帖子

回復 403# bubblestar

I have not compiled for weeks. Just start again today because I found something not working properly in my far remote IP01. May perhaps try to upgrade

Rank: 1

184^#

發表於 2011-2-13 22:43 | 顯示全部帖子

On the way to your mail box

Rank: 1

185^#

發表於 2011-2-14 06:33 | 顯示全部帖子

回復 412# bubblestar
It is quite big. The failure to boot may be related to the firmware too big i.e. without sufficient space for the root.

My DHCP version means that during compilation, I have made change to the /persistent/etc/network.conf and /persistent/etc/asterisk/rc_org.conf to ensure dhcp = yes. It is is for me and other with a intranet lan address not in the range of 192.168.1,XX

Rank: 1

186^#

發表於 2011-2-14 07:13 | 顯示全部帖子

回復 412# bubblestar

You may de-select the g729. Other is just quite standard. However, it is the limit for the hardware. root partitiion needs a bigger size.

BTW, are you able to make the boot and successful login?

Rank: 1

187^#

發表於 2011-2-14 07:13 | 顯示全部帖子

What is the log messages what you login in via SSH?

Rank: 1

188^#

發表於 2011-2-14 13:44 | 顯示全部帖子

It may not be the problem.

Please login in and dump the log from asterisk

Rank: 1

189^#

發表於 2011-2-14 18:02 | 顯示全部帖子

I am interested in your SSH login and asterisk log. I suspected that the space at root partition is not enough.

Rank: 1

190^#

發表於 2011-2-14 19:51 | 顯示全部帖子

回復 420# bubblestar

You are welcome.

Rank: 1

191^#

發表於 2011-2-14 22:47 | 顯示全部帖子

回復 422# Qnewbie

Space available is of concern.

Rank: 1

192^#

發表於 2011-2-15 09:17 | 顯示全部帖子

Can you just login in via SSH and see if asterisk is running? If you update via early version, you may need to reset all the configuration. Because they have changed the ways of how GUI is handled, using reverse proxy. Your old configuration won't work.

Please also post the CLI log when access by GUI.

Rank: 1

193^#

發表於 2011-2-15 19:45 | 顯示全部帖子

Please see the reply from developer

Hi Ckleea, Can you please try the latest Switchfin update. You should be able to login now. Inadyn is updated to more recent release but I haven't had time to test it. All comments invited. Cheers Dimitar

Rank: 1

194^#

發表於 2011-2-15 22:34 | 顯示全部帖子

回復 427# bubblestar

This is how we make program develop. Positive feedback and then bug fixed.

Rank: 1

195^#

發表於 2011-2-16 09:47 | 顯示全部帖子

我估計仲有其他問題，已電郵 developer。另外，理論上，in hyperterminal, can you login? If you can, please see if asterisk is running and the console output.
直覺上，bubblestar 嘅output 係Ok冇問題。
最終個句，要你地幫手，remote 太遠，唔可以自己 upgrade