ckleea

還要改進動 asterisk file 內的 path

簡單方法是從 raspberry pi image 抄出來，放進 /etc/init.d
chmod a+x /etc/init.d/asterisk
update-rc.d asterisk defaults

ckleea

asterisk start up scripts for debian

1. #! /bin/sh
   
2. # $Id: rc.debian.asterisk 379790 2013-01-21 20:40:13Z mjordan $
   
3. #
   
4. # Mon Jun 04 2007 Iñaki Baz Castillo <ibc@in.ilimit.es>
   
5. # - Eliminated SAFE_ASTERISK since it doesn't work as LSB script (it could require a independent "safe_asterisk" init script).
   
6. # - Load and use the standar "/lib/lsb/init-functions".
   
7. # - Added "--oknodo" to "start-stop-daemon" for compatibility with LSB:
   
8. #   http://www.linux-foundation.org/spec/refspecs/LSB_3.0.0/LSB-Core-generic/LSB-Core-generic/iniscrptact.html
   
9. #
   
10. # Thu Nov 17 2005 Gregory Boehnlein <damin@nacs.net>
    
11. # - Reversed behavior of LD_ASSUME_KERNEL=2.4.1
    
12. # - Added detailed failure messages
    
13. #
    
14. # Sun Jul 18 2004 Gregory Boehnlein <damin@nacs.net>
    
15. # - Added test for safe_asterisk
    
16. # - Changed "stop gracefully" to "stop now"
    
17. # - Added support for -U and -G command line options
    
18. # - Modified "reload" to call asterisk -rx 'reload'
    
19. 
    
20. PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
    
21. NAME=asterisk
    
22. DESC="Asterisk PBX"
    
23. # Full path to asterisk binary
    
24. DAEMON=/usr/sbin/asterisk
    
25. ASTVARRUNDIR=/var/run/asterisk
    
26. ASTETCDIR=/etc/asterisk
    
27. TRUE=/bin/true
    
28. 
    
29. ### BEGIN INIT INFO
    
30. # Provides:                asterisk
    
31. # Required-Start:    $network $syslog $named $local_fs $remote_fs
    
32. # Required-Stop:     $network $syslog $named $local_fs $remote_fs
    
33. # Should-Start:      dahdi misdn lcr wanrouter mysql postgresql
    
34. # Should-Stop:       dahdi misdn lcr wanrouter mysql postgresql
    
35. # Default-Start:        2 3 4 5
    
36. # Default-Stop:                0 1 6
    
37. # Short-Description:        Asterisk PBX
    
38. # Description:                the Asterisk Open Source PBX
    
39. ### END INIT INFO
    
40. 
    
41. set -e
    
42. 
    
43. if ! [ -x $DAEMON ] ; then
    
44.         echo "ERROR: $DAEMON not found"
    
45.         exit 0
    
46. fi
    
47. 
    
48. if ! [ -d $ASTETCDIR ] ; then
    
49.         echo "ERROR: $ASTETCDIR directory not found"
    
50.         exit 0
    
51. fi
    
52. 
    
53. # Use the LSB standard functions for services management
    
54. . /lib/lsb/init-functions
    
55. 
    
56. # Allow configuration overrides in /etc/default/asterisk
    
57. CONFIG0=`readlink $0 || :` # readlink returns 1 when something isn't a symlink
    
58. if [ "$CONFIG0" = "" ]; then
    
59.         CONFIGFILE=/etc/default/`basename $0`
    
60. else
    
61.         CONFIGFILE=/etc/default/`basename $CONFIG0`
    
62. fi
    
63. [ -r $CONFIGFILE ] && . $CONFIGFILE
    
64. 
    
65. case "$1" in
    
66.   start)
    
67.         # Check if Asterisk is already running.  If it is, then bug out, because
    
68.         # starting up Asterisk when Asterisk is already running is very bad.
    
69.         VERSION=`${DAEMON} -rx 'core show version' 2>/dev/null || ${TRUE}`
    
70.         if [ "`echo $VERSION | cut -c 1-8`" = "Asterisk" ]; then
    
71.                 echo "Asterisk is already running.  $0 will exit now."
    
72.                 exit 0
    
73.         fi
    
74. 
    
75.         log_begin_msg "Starting $DESC: $NAME"
    
76.         if [ ! -d $ASTVARRUNDIR ]; then
    
77.                 mkdir -p $ASTVARRUNDIR
    
78.         fi
    
79.         if [ $AST_USER ] ; then
    
80.                 ASTARGS="-U $AST_USER"
    
81.                 chown $AST_USER $ASTVARRUNDIR
    
82.         fi
    
83.         if [ $AST_GROUP ] ; then
    
84.                 ASTARGS="$ASTARGS -G $AST_GROUP"
    
85.                 chgrp $AST_GROUP $ASTVARRUNDIR
    
86.         fi
    
87.         if [ $ALTCONF ]; then
    
88.                 ASTARGS="$ASTARGS -C \"$ALTCONF\""
    
89.         fi
    
90.         if [ "x$COREDUMP" = "xyes" ]; then
    
91.                 ASTARGS="$ASTARGS -g"
    
92.         fi
    
93.         if [ "0$MAXLOAD" -gt "0" ]; then
    
94.                 ASTARGS="$ASTARGS -L $MAXLOAD"
    
95.         fi
    
96.         if [ "0$MAXCALLS" -gt "0" ]; then
    
97.                 ASTARGS="$ASTARGS -M $MAXCALLS"
    
98.         fi
    
99.         if [ "0$VERBOSITY" -gt "0" ]; then
    
100.                 for i in `seq 1 $VERBOSITY`; do
     
101.                         ASTARGS="$ASTARGS -v"
     
102.                 done
     
103.                 # -v implies -f, so we override that implicit specification here
     
104.                 ASTARGS="$ASTARGS -F"
     
105.         fi
     
106.         if [ "x$INTERNALTIMING" = "xyes" ]; then
     
107.                 ASTARGS="$ASTARGS -I"
     
108.         fi
     
109.         if [ "x$TEMPRECORDINGLOCATION" = "xyes" -o "x$TMPRECORDINGLOCATION" = "xyes" ]; then
     
110.                 ASTARGS="$ASTARGS -t"
     
111.         fi
     
112.         if test "x$COLOR" = "xno" ; then
     
113.                 ASTARGS="$ASTARGS -n"
     
114.         fi
     
115.         # "start-stop-daemon --oknodo" returns 0 even if Asterisk was already running (as LSB expects):
     
116.         start-stop-daemon --start --oknodo --exec $DAEMON -- $ASTARGS
     
117.         log_end_msg $?
     
118.         ;;
     
119.   stop)
     
120.         log_begin_msg "Stopping $DESC: $NAME"
     
121.         # "start-stop-daemon --oknodo" returns 0 even if Asterisk was already stopped (as LSB expects):
     
122.         start-stop-daemon --stop --oknodo --exec $DAEMON
     
123.         log_end_msg $?
     
124.         ;;
     
125.   reload)
     
126.         echo "Reloading $DESC configuration files."
     
127.         $DAEMON -rx 'module reload' > /dev/null 2> /dev/null
     
128.         ;;
     
129.   restart|force-reload)
     
130.         $0 stop
     
131.         sleep 2  # It needs some time to really be stopped.
     
132.         $0 start
     
133.         # "restart|force-reload" starts Asterisk and returns 0 even if Asterisk was stopped (as LSB expects).
     
134.         ;;
     
135.   status)
     
136.        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
     
137.        ;;
     
138.   *)
     
139.         N=/etc/init.d/$NAME
     
140.         echo "Usage: $N {start|stop|restart|reload|force-reload|status}" >&2
     
141.         exit 1
     
142.         ;;
     
143. esac

複製代碼