bubblestar

回復 442# 角色


    Me neither

bubblestar

回復 443# 角色


    Thanks for the rescure method advice.

    What is the version of your uImage.ext2 ?  Is that the version from original ATCOM other than Switchfin's uImage.ext2?

    Thanks

bubblestar

Hi! CK,

Heard from YH that he can revert to stable verion using Switchfin's uImage.ext2 without the need to use ATOCM's earlier IPPBX.ext2 first.  It sounds more efficient.

Do you still have SVN437 uImage in ext2 format? As I have been using SVN437 uImage-MD5 for a period of time.  It has been great and all my existing backup is based on that.  Hence,  I want to keep its ext2 copy for future recovering purpose.  

Thanks

bubblestar

Fine, fine.  It is one of most two stable releases that I have used.

bubblestar

回復 457# 角色


    Thanks for the information.

bubblestar

Successfully getting back the previous SVN as advised.  Thanks.

bubblestar

I also re-compiled my own SVN437.  The result is more or less the same as what YHFung did.

Basically, I used all default in make menuconfig + Asterisk Custom Settings + g729 + iptables.  That's all.  Files size is less than 7.9 MB.

My preliminary findings after compilation and the changes are that of followings:

1.  the Operator Panel | Admin text is added on top left most corner on the GUI.  However, don't know how to make it works.  Will explore later.

2.  After restore all my backup configuration from previous ckleea's SVN437 version, I found that extensions.conf no longer exists in File Editor.  All extensions.conf settings are now replaced by extensions_custom.conf.

3.  All settings are smoothly fit into the new configuration files except Dial Plan, Outgoing Calling Rules and Incoming Rules.  I have to copy all these settings from former extensions.conf to the new extensions_custom.conf respectively.  Not so difficult and all are recognised as expected.

4.  The distinguish change is DP in GUI.  It changes to a new look.  Please see below:

New Dial Plan look in GUI

下載 (32.95 KB)
NEW DP LOOK

2011-2-18 12:03

Dial Plan after adding my Outgoing Rules

下載 (35.73 KB)
DP AFTER SETTINGS

2011-2-18 12:03

Will report if further changes are found.  If the current and latest SVN492 becomes stable, I will upgrade to it accordingly.

bubblestar

Pressing the Operator Panel triggers Nothing happen.

下載 (28.05 KB)

2011-2-18 12:29

bubblestar

After 2 days trial and test, I reaffirm that the most stable release still fall to ckleea's SVN432 and SVN437 which I have been using for months without problem.  The latest releases from Switchfin may still be under development which has not resolved some looping problem.  I recommend to wait and see except you like to become explorer and pioneer.

bubblestar

I learn from the Switchfin Forum that someone failed to log in the GUI and he got the reply as below on early Jan. 2011.

http://www.switchfin.org/index.p ... &Itemid=54#p901

Quote:

Please try now the issue was with your http.conf, in the newer versions we replaced the asterisk httpd with the busybox httpd, a simple reset of the configs using "gzip -dc /defaults.tgz | tar xvf -" fixed it up.

Unquote:

In this connection, should we avoid from simply putting all the old configuration files after compiling the new releases?  Will those old files affect our recent GUI log in problem?

bubblestar

In this case, it is suggested not to upgrade the version >= svn488.  

Also, the looping reboot issue seems not fixed yet even on svn496. I feel that it is someting related to DHCP.  When I disable DHCP and use my own IP and DNS info., it becomes unstable and reboot endlessly.

Now, I turn back to ckleea's another compiled SVN456 which is under evaluation.

bubblestar

Glad to hear that.  As I always said, svn 437 is one of the two stable releases that I have used so far.

BTW, Any tricks to tame the naughty Draytek router?

bubblestar

Successfully upgraded to SVN 497 this early morning.

1.  Looping problem is fixed.
2.  GUI can now be entered without problem.
3.  extensions.conf totally replaced with extensions_custom.conf and custom.conf
4.  extensions.conf must include only 2 lines to read and execute dial plans in extensions_custom.conf now
     #include extensions_custom.conf
     #include custom_conf

SIP, IAX, GV, IPTEL, PSTN are all fine now.

A co-incident match, SVN437 is a stable release and now SVN497 is hopefully another one.  A final say can only be confirmed after next few days evaluation.

Is 7 lucky number for Switchfin?

Happy sharing.

bubblestar

回復 486# yiucsw


    PM already

bubblestar

Upgrade 之前最好 reset configuration to default 先，係System Setup/Options/Reset Configuration  可以先做此動作，比較好D。